User Panel
took it out yesterday and got it sighted in at 50m and had absolutely no problems with it at all.
http://sphotos.xx.fbcdn.net/hphotos-snc7/484577_390260380985520_100000046842233_1473685_129284938_n.jpg |
|
Can you recommend a quick detach mount for the 1-4x scope? I was going to order a micro dot for another rifle when they get back in stock, but will go ahead and include a mount with my order as well.
|
|
Quoted: Can you recommend a quick detach mount for the 1-4x scope? I was going to order a micro dot for another rifle when they get back in stock, but will go ahead and include a mount with my order as well. Mine is in a larue qd lt 104. |
|
How well does this scope hold zero with the stock mounting brackets?
I'd like to put a scope on one of my AR's but it wouldn't see as much use as my red dot and I'd hate to keep switching back and forth and having to rezero. |
|
Quoted:
Can you recommend a quick detach mount for the 1-4x scope? I was going to order a micro dot for another rifle when they get back in stock, but will go ahead and include a mount with my order as well. I like it, but it's a little out of my price range. It's more than the scope itself. I'm just a casual plinker so I don't need the highest quality stuff. |
|
Quoted:
How well does this scope hold zero with the stock mounting brackets? I'd like to put a scope on one of my AR's but it wouldn't see as much use as my red dot and I'd hate to keep switching back and forth and having to rezero. Our clamp mount will not move once tightened. I do recommended a drop of Loctite. |
|
Quoted:
Quoted:
Can you recommend a quick detach mount for the 1-4x scope? I was going to order a micro dot for another rifle when they get back in stock, but will go ahead and include a mount with my order as well. I like it, but it's a little out of my price range. It's more than the scope itself. I'm just a casual plinker so I don't need the highest quality stuff. Burris QD https://www.primaryarms.com/Burris_ARP_E_P_R_Quick_Detachable_Scope_Mou_p/bu410342.htm |
|
Quoted:
Quoted:
Quoted:
Does the Millet DMS cat tail work on this? what about you making one for it??? That is on the list. I will see if we can bump it up a few places. Any progress here? |
|
Quoted:
Quoted:
Quoted:
Can you recommend a quick detach mount for the 1-4x scope? I was going to order a micro dot for another rifle when they get back in stock, but will go ahead and include a mount with my order as well. I like it, but it's a little out of my price range. It's more than the scope itself. I'm just a casual plinker so I don't need the highest quality stuff. Burris QD https://www.primaryarms.com/Burris_ARP_E_P_R_Quick_Detachable_Scope_Mou_p/bu410342.htm Ordered A little late for me now, but it would be nice if a package was available with this mount instead of the standard mounts. |
|
|
people who have used this scope, how close is the 1x on the scope to true 1x?
|
|
Quoted: people who have used this scope, how close is the 1x on the scope to true 1x? Very close. Close enough to use it with both eyes open. |
|
Quoted:
Quoted:
people who have used this scope, how close is the 1x on the scope to true 1x? Very close. Close enough to use it with both eyes open. sweet, thanks. that was my concern |
|
http://olegvolk.net/blog/2012/05/18/gsg522-gets-scoped/
1-4x at the range. |
|
Originally Posted By Oleg Volk:
http://olegvolk.net/blog/2012/05/18/gsg522-gets-scoped/ 1-4x at the range. What mount did you use? |
|
Originally Posted By Oleg Volk:
30mm mount made by Armalite Many thanks! |
|
Can anyone recommend which mount option I should pick if I don't want to be shooting NTCH?
|
|
Quoted:
Can anyone recommend which mount option I should pick if I don't want to be shooting NTCH? Either our standard or non extended Deluxe. The Deluxe has a larger clamping surface and two cross bolts. Both are fine on a AR. Marshall |
|
Quoted:
anyone run these really hard? The 1-4X is rated up to a .50 Beowulf. |
|
|
Bought one for my dedicated 22. Also got the extended scope mount. Quick shipping, good communication, good packaging and solid hardware. Extended mount matches the quality of a PEPR mount I have on another AR rifle. The scope is hefty, solid and has clear glass. I much prefer the PA reticle over the DMS1 which was another alternative I considered. I've only shot it a couple of tiimes but I'm already a fan of PA customer service so i'm not worried if any problems happen to arise within the warranty period.
I can definiltey see this scope fitting into future builds. I am pleased with the quality and pricepoint of this scope and mount. |
|
Marsh, do you know the subtensions for the reticle?
Also, has anyone run one of these on an M1A? I know these have been tested on up to a .450 Marlin, but the M1A's weird recoil impluse is notorious for destroying scopes that do just fine on much harder-recoiling bolt guns. Shit, the folks at Leatherwood said their CMR was tested on up to .50 BMG... and sure enough, after about 100 rounds on my M1A, the reticle was moving in the housing and there was debris inside the tube. It's getting sent back, and I am looking for a replacement. I want to make sure whatever I get is good to go... it will be getting used in the Pecos Run n' Gun, and possibly to kill some deer and hogs. |
|
|
|
Quoted:
Just ordered mine! Any word on a cat tail for these? You'll like it. I want a cat tail too. Does anyone know of one that will work on the PA 1-4? |
|
Quoted:
Quoted:
Just ordered mine! Any word on a cat tail for these? You'll like it. I want a cat tail too. Does anyone know of one that will work on the PA 1-4? Thanks, good to know! Mine is going on a 15-22 also... Unfortunately I don't have any beautiful property like yours to use it on, but I'll find some rabbits or something to blow up when it cools down a little here! |
|
Quoted:
http://www.hunt101.com/data/500/photo_1_32.JPG http://www.hunt101.com/data/500/photo_2_33.JPG That's a sweet bag. Where can I get one? |
|
Quoted:
Quoted:
http://www.hunt101.com/data/500/photo_1_32.JPG http://www.hunt101.com/data/500/photo_2_33.JPG That's a sweet bag. Where can I get one? http://www.laruetactical.com/covert-rifle-case-mkII |
|
Just mounted it last night...absolutely enamored with the look of my rifle now!!
I would love a cat tail though...hint hint. http://i1055.photobucket.com/albums/s501/smittersrx7/IMG_20120629_132748.jpg http://i1055.photobucket.com/albums/s501/smittersrx7/IMG_20120629_132756.jpg |
|
I had my heart set on a 3x Compact, but after a lot of research, I'm going to try the 1-4x variable. I hope it's going to be a good compromise between an RDS and something that will get me a little more distance.
|
|
Primary Arms 1-4x24, Primary Arms Carbine length Rail.
https://dl.dropbox.com/u/34971369/IMG_20120705_143044.jpg |
|
|
Quoted:
Nice looking rifles. Slayfan21, what handguard is that? JP Vtac 12.5 I thinks yep Here Bit of a pain to install tho |
|
Will this optic handle the recoil of my AR10? I love PA optics and trust Marshall and PA to the fullest, but wanted to be sure.l before I pulled the trigger. Has anyone put lots of. 308+ through this optic yet?
Thanks. |
|
I have a DPMS oracle with magpul backup sights which mount should I get? I would like to co witness if possible. Thanks!
|
|
Quoted:
Will this optic handle the recoil of my AR10? I love PA optics and trust Marshall and PA to the fullest, but wanted to be sure.l before I pulled the trigger. Has anyone put lots of. 308+ through this optic yet? Thanks. Yes |
|
Quoted:
I have a DPMS oracle with magpul backup sights which mount should I get? I would like to co witness if possible. Thanks! You can't cowitness with a magnifier optic. The MBUS can stay in place but the rear will be down under the scope. Do you shoot with your nose close to the charging handle. That will determine what mount you need. |
|
Quoted:
Yes Sir right against the charging handle. Deluxe extended mount. Use the drop down menu on the scope page and the mount is discounted. |
|
i am about to buy one of these scopes, but would like to see some pictures through the scope with a standard A2 front sight post. If you have them, can you state what mount and what power they were taken at?
I have seen numerous comments ranging from the sight cant be seen at higher magnifications to you cant see it above 2x to you can barely see it at all powers. As with anything else, peoples opinions vary greatly so i would like to see some pictures to form my own opinion. Thanks in advance. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.