User Panel
I want one of these rifles, but I live in California. I need it to have an AK style bullet button like the CMMG Mutant has for theirs. Or else I would need it to ship featureless, with a fixed A2 style stock, a compensator instead of a flash hider, and a featureless grip. Your website says you have them in stock but I can't order one until I know if I'll be able to have it shipped in the right configuration for this restrictive state I live in.
|
|
|
So wanting to build an 11" on the KS-47 receiver set!
-Lee |
|
"I suppose it is tempting, if the only tool you have is a hammer, to treat everything as if it were a nail." -Abraham Maslow
|
ETA on stripped uppers & lowers?
|
|
|
Stripped lowers were in stock for a few minutes earlier today. It was in a PSA email, sold out quick though.
|
|
|
|
Does anyone know if there will ever be a bolt hold option added to the KS47 platform?
|
|
|
Left-handed and right-minded!
|
Originally Posted By WrenchGuy:
No, the AK mag is not designed for it. View Quote View All Quotes View All Quotes Originally Posted By WrenchGuy:
Originally Posted By manywits:
Does anyone know if there will ever be a bolt hold option added to the KS47 platform? No, the AK mag is not designed for it. The Yugo mag is capable of this task. I was just thinking that the bolt hold could be added mechanically to the KS lower similar to an AR. This way the lower would react based on the mag position (empty) and not due to the mag style (BHO or not) |
|
|
Any plans for a 12.5 inch SBR/Pistol upper? If so, can you estimate the overall length for form 1 purposes?
|
|
|
|
Lowers back in stock
|
|
|
And gone again.... seconds later.
|
|
|
Originally Posted By MaverickAA:
THIS. ... or even better... the trifecta: KS stripped lower/upper and BCG as a 3 part "kit" View Quote View All Quotes View All Quotes Originally Posted By MaverickAA:
Originally Posted By m6z:
ETA on stripped uppers & lowers? THIS. ... or even better... the trifecta: KS stripped lower/upper and BCG as a 3 part "kit" YES! THIS! |
|
"I suppose it is tempting, if the only tool you have is a hammer, to treat everything as if it were a nail." -Abraham Maslow
|
Originally Posted By badkarmaiii: Originally Posted By MaverickAA: Originally Posted By m6z: ETA on stripped uppers & lowers? THIS. ... or even better... the trifecta: KS stripped lower/upper and BCG as a 3 part "kit" YES! THIS! I am too waiting for this combo 3 part kit. On the other hand, I don't want to be the first one to test out the new design. I would like to wait for awhile till people have a chance to test its rigidity and reliability. |
|
|
Extractors appear to be the bane of creations such as these especially with the 5.56 sized bolt versus the 7.62 AR-10 variety. What's the current life span and availability on replacements?
|
|
" We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm. " -George Orwell
Celer, Silens, Mortalitas "Swift, Silent, Deadly" |
Originally Posted By MarineSgtHaan:
So this was my review... I had to send it back for the feeding issues. While their communication is poor they were able to fix the feeding issues. It was caused by the BCG. However, once I received it back from PSA I didn't get it back in the same condition I sent it back to them. So they want to give me $30 credit or I can send it back yet again... Just send me the handguards! Dammit PSA this is not how you handle customer service https://m.facebook.com/photo.php?fbid=10156699016820467&id=853840466&set=p.10156699016820467&source=47 View Quote Glad to hear the feeding was an easy fix. Sucks about your rail. I've messed with their slim rails before (I like them a lot), but they can be very tight to get off the barrel nut. I'd sent it in and let them swap it to be honest. ETA: FIFY |
|
|
After a $1000 plus spent on this they should't expect me to be inconvenienced yet again. It's called customer service not customer inconvenience. I work with customers all day 6 days a week and when we mess up we own it and make it right and make it right away!
|
|
|
Originally Posted By MarineSgtHaan:
After a $1000 plus spent on this they should't expect me to be inconvenienced yet again. It's called customer service not customer inconvenience. I work with customers all day 6 days a week and when we mess up we own it and make it right and make it right away! View Quote I don't disagree with you on that point, just giving you a heads-up on the potentially tight rail/barrel nut fit. If yours is anywhere near as tight as mine was it's worth sending it back in. |
|
|
After making a stand PSA agreed to just send me a new handguard. So thank you PSA for doing the right thing!
|
|
|
Got my stripped lower today. Am keeping an eye out on the website for stopped uppers, BCGs, and barrels.
|
|
|
" We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm. " -George Orwell
Celer, Silens, Mortalitas "Swift, Silent, Deadly" |
Does PSA have any plans to offer the stripped KS47 upper to go with the lower?
|
|
|
Eventually, yes...but it might be a couple of months before we see them available.
I'm waiting for the upper first, then I'll get the rest that I need as the upper will be the hardest part to get. |
|
Left-handed and right-minded!
|
It appears to me that the demand of ks47 lower has been slow down. It's still available to order after PSA notification email was sent out more than 24 hours ago.
|
|
|
Early in this thread PSA says this will work with an AR47 lower, but http://palmettostatearmory.com/psa-ks47-16-classic-13-keymod-rifle-kit.html says it only works with a KS47 lower. Can anyone confirm fit/function for me?
|
|
|
Originally Posted By noob:
Early in this thread PSA says this will work with an AR47 lower, but http://palmettostatearmory.com/psa-ks47-16-classic-13-keymod-rifle-kit.html says it only works with a KS47 lower. Can anyone confirm fit/function for me? View Quote i saw that too, as I've been waiting for the AR47 kits to come back, but they don't even show as not in stock on the website anymore. The only thing I can think of is that the upper is compatible with a standard lower, but maybe the lower build kit that comes with the rifle kit is only compatible with the KS47 lower. |
|
Ivan, did you see the sunrise this morning?
|
Originally Posted By JayJay4735: i saw that too, as I've been waiting for the AR47 kits to come back, but they don't even show as not in stock on the website anymore. The only thing I can think of is that the upper is compatible with a standard lower, but maybe the lower build kit that comes with the rifle kit is only compatible with the KS47 lower. View Quote View All Quotes View All Quotes Originally Posted By JayJay4735: Originally Posted By noob: Early in this thread PSA says this will work with an AR47 lower, but http://palmettostatearmory.com/psa-ks47-16-classic-13-keymod-rifle-kit.html says it only works with a KS47 lower. Can anyone confirm fit/function for me? i saw that too, as I've been waiting for the AR47 kits to come back, but they don't even show as not in stock on the website anymore. The only thing I can think of is that the upper is compatible with a standard lower, but maybe the lower build kit that comes with the rifle kit is only compatible with the KS47 lower. |
|
|
Originally Posted By travinh: PSA has put out the very confuse information starting from the video of 2016 shotshow. I gave up on building the KS-47. Instead, I am going to get the CZ Scorpion EVO 3 S1 pistol. View Quote View All Quotes View All Quotes Originally Posted By travinh: Originally Posted By JayJay4735: Originally Posted By noob: Early in this thread PSA says this will work with an AR47 lower, but http://palmettostatearmory.com/psa-ks47-16-classic-13-keymod-rifle-kit.html says it only works with a KS47 lower. Can anyone confirm fit/function for me? i saw that too, as I've been waiting for the AR47 kits to come back, but they don't even show as not in stock on the website anymore. The only thing I can think of is that the upper is compatible with a standard lower, but maybe the lower build kit that comes with the rifle kit is only compatible with the KS47 lower. PSA has put out the very confuse information starting from the video of 2016 shotshow. I gave up on building the KS-47. Instead, I am going to get the CZ Scorpion EVO 3 S1 pistol. |
|
|
Originally Posted By JayJay4735:
i saw that too, as I've been waiting for the AR47 kits to come back, but they don't even show as not in stock on the website anymore. The only thing I can think of is that the upper is compatible with a standard lower, but maybe the lower build kit that comes with the rifle kit is only compatible with the KS47 lower. View Quote View All Quotes View All Quotes Originally Posted By JayJay4735:
Originally Posted By noob:
Early in this thread PSA says this will work with an AR47 lower, but http://palmettostatearmory.com/psa-ks47-16-classic-13-keymod-rifle-kit.html says it only works with a KS47 lower. Can anyone confirm fit/function for me? i saw that too, as I've been waiting for the AR47 kits to come back, but they don't even show as not in stock on the website anymore. The only thing I can think of is that the upper is compatible with a standard lower, but maybe the lower build kit that comes with the rifle kit is only compatible with the KS47 lower. Thank you for the inquiry. The build kit is specific for a KS47 lower - it does not have a trigger guard, bolt catch assembly, or mag release included. One would have to purchase those items separately to finish this kit with a standard ar lower. The upper will work with an AR lower, this kit does not have the parts to finish a standard ar lower. |
|
Palmetto State Armory
200 Business Park Blvd Columbia, SC 29203 Web Sales: 1-803-724-6950 [email protected] |
Does the KS-47 bolt/barrel use a "standard 0.125" bolt face depth"? I'm wanting a 12.5 inch barrel and the only one I've been able to find is through another manufacturer (Faxon). I'm trying to determine if this barrel would be compatible with the KS-47 upper/bolt.
Barrel: Faxon From their website: "Note: Faxon 7.62x39 barrels are manufactured to use a standard .125" bolt-face-depth bolt. Ensure you use the proper bolt face depth. Do not use with a .136" face depth bolt." In other news; I sent the form 1 for my stripped lower off today. |
|
|
Originally Posted By travinh:
It appears to me that the demand of ks47 lower has been slow down. It's still available to order after PSA notification email was sent out more than 24 hours ago. View Quote I would imagine that people are not in a hurry, since they do not offer the stripped upper (yet) to make the lower useable. It's a paperweight until they offer stripped uppers. Many (like myself) are waiting for the "3-part essentials kit" to consolidate shipping costs. |
|
|
Originally Posted By MaverickAA:
I would imagine that people are not in a hurry, since they do not offer the stripped upper (yet) to make the lower useable. It's a paperweight until they offer stripped uppers. Many (like myself) are waiting for the "3-part essentials kit" to consolidate shipping costs. View Quote View All Quotes View All Quotes Originally Posted By MaverickAA:
Originally Posted By travinh:
It appears to me that the demand of ks47 lower has been slow down. It's still available to order after PSA notification email was sent out more than 24 hours ago. I would imagine that people are not in a hurry, since they do not offer the stripped upper (yet) to make the lower useable. It's a paperweight until they offer stripped uppers. Many (like myself) are waiting for the "3-part essentials kit" to consolidate shipping costs. I'd build my own upper in a heartbeat if PSA would make the stripped uppers available. Once the uppers can be had, I think you'll see all the other parts moving quite well. I'm not buying anything untill the uppers are available...I'll get that, then the rest. I already have a fully functioning AR-47 that I built, so all I really need is the receiver set and BCG. |
|
Left-handed and right-minded!
|
Yep, I'm waiting on the stripped upper to become available.
|
|
|
Originally Posted By MaverickAA:
I would imagine that people are not in a hurry, since they do not offer the stripped upper (yet) to make the lower useable. It's a paperweight until they offer stripped uppers. Many (like myself) are waiting for the "3-part essentials kit" to consolidate shipping costs. View Quote View All Quotes View All Quotes Originally Posted By MaverickAA:
Originally Posted By travinh:
It appears to me that the demand of ks47 lower has been slow down. It's still available to order after PSA notification email was sent out more than 24 hours ago. I would imagine that people are not in a hurry, since they do not offer the stripped upper (yet) to make the lower useable. It's a paperweight until they offer stripped uppers. Many (like myself) are waiting for the "3-part essentials kit" to consolidate shipping costs. |
|
|
Originally Posted By noob:
Meaning what? Upper, lower, BCG (or just carrier)? View Quote View All Quotes View All Quotes Originally Posted By noob:
Originally Posted By MaverickAA:
Originally Posted By travinh:
It appears to me that the demand of ks47 lower has been slow down. It's still available to order after PSA notification email was sent out more than 24 hours ago. I would imagine that people are not in a hurry, since they do not offer the stripped upper (yet) to make the lower useable. It's a paperweight until they offer stripped uppers. Many (like myself) are waiting for the "3-part essentials kit" to consolidate shipping costs. Upper, lower, and complete BCG...PSA has customized both the bolt and carrier to work with AK mags and yet still work with AR-47 mags. |
|
Left-handed and right-minded!
|
I have pretty much everything for this build....I have a Faxon 12.5 barrel, I have the lower and all the other parts with the exception of the stripped upper and BCG....I do hope that they use a .125 depth on the bolt..I assume alot of you guys did the same as a result of 41F.....good luck to all
|
|
|
Originally Posted By Odie18:
I have pretty much everything for this build....I have a Faxon 12.5 barrel, I have the lower and all the other parts with the exception of the stripped upper and BCG....I do hope that they use a .125 depth on the bolt..I assume alot of you guys did the same as a result of 41F.....good luck to all View Quote If you find out let me know, I want to use a Faxon 12.5 but am waiting to buy until I hear if it is compatible. |
|
|
Originally Posted By rlltd42:
Does the KS-47 bolt/barrel use a "standard 0.125" bolt face depth"? I'm wanting a 12.5 inch barrel and the only one I've been able to find is through another manufacturer (Faxon). I'm trying to determine if this barrel would be compatible with the KS-47 upper/bolt. Barrel: Faxon From their website: "Note: Faxon 7.62x39 barrels are manufactured to use a standard .125" bolt-face-depth bolt. Ensure you use the proper bolt face depth. Do not use with a .136" face depth bolt." In other news; I sent the form 1 for my stripped lower off today. View Quote The bolt face depth is .125" |
|
Palmetto State Armory
200 Business Park Blvd Columbia, SC 29203 Web Sales: 1-803-724-6950 [email protected] |
Thank you for the response...and now for the million dollar question ....any idea when the stripped upper will become available ???
|
|
|
For the PSA rep, may I ask some questions on your rifle with a suppressor?
1 Has the KS47 been tested with a suppressor? 2 Do you have the ability to add an adjustable gas block? I'd rather be the bullet launcher operator, not the mechanic. 3 Any concerns about back pressure or over pressure with a can? 4 Any info on whether bits of powder come back at the shooter? 5 Modern rifleman dot net had a recent story indicating the Russians will be producing a subsonic 7.62x39 round based on the 57-N-231U. I know this is speculation, but any comments on this with your rifle and a can? 6 What would be PSA's support for this config, especially if I had to add the gas block? Thanks in advance for your patience with these questions. I am very interested in your product as a suppressed hog slayer. |
|
|
Originally Posted By canard:
For the PSA rep, may I ask some questions on your rifle with a suppressor? 1 Has the KS47 been tested with a suppressor? 2 Do you have the ability to add an adjustable gas block? I'd rather be the bullet launcher operator, not the mechanic. 3 Any concerns about back pressure or over pressure with a can? 4 Any info on whether bits of powder come back at the shooter? 5 Modern rifleman dot net had a recent story indicating the Russians will be producing a subsonic 7.62x39 round based on the 57-N-231U. I know this is speculation, but any comments on this with your rifle and a can? 6 What would be PSA's support for this config, especially if I had to add the gas block? Thanks in advance for your patience with these questions. I am very interested in your product as a suppressed hog slayer. View Quote From a functional standpoint, this is an AR, so all of the characteristics of a suppressed AR apply. We do not currently offer a model with an adjustable gas block. As a manufacturer, we cannot warranty any changes made by third parties. However, there is a wealth of information here on AR15.com on how to tame the gas on suppressed ARs. If you wish to add an adjustable gas block, there are many to choose from. You will need to have a gunsmith install it and possibly modify the rail. As production increases, we may have more suppressor friendly rail options. Hope that helps. |
|
Palmetto State Armory
200 Business Park Blvd Columbia, SC 29203 Web Sales: 1-803-724-6950 [email protected] |
Originally Posted By MaverickAA:
I would imagine that people are not in a hurry, since they do not offer the stripped upper (yet) to make the lower useable. It's a paperweight until they offer stripped uppers. Many (like myself) are waiting for the "3-part essentials kit" to consolidate shipping costs. View Quote View All Quotes View All Quotes Originally Posted By MaverickAA:
Originally Posted By travinh:
It appears to me that the demand of ks47 lower has been slow down. It's still available to order after PSA notification email was sent out more than 24 hours ago. I would imagine that people are not in a hurry, since they do not offer the stripped upper (yet) to make the lower useable. It's a paperweight until they offer stripped uppers. Many (like myself) are waiting for the "3-part essentials kit" to consolidate shipping costs. Here's what I did to avoid the wait for the stripped uppers. https://youtu.be/1L52Hl4GJGo |
|
|
Originally Posted By HotShotScott:
Here's what I did to avoid the wait for the stripped uppers. https://youtu.be/1L52Hl4GJGo View Quote View All Quotes View All Quotes Originally Posted By HotShotScott:
Originally Posted By MaverickAA:
Originally Posted By travinh:
It appears to me that the demand of ks47 lower has been slow down. It's still available to order after PSA notification email was sent out more than 24 hours ago. I would imagine that people are not in a hurry, since they do not offer the stripped upper (yet) to make the lower useable. It's a paperweight until they offer stripped uppers. Many (like myself) are waiting for the "3-part essentials kit" to consolidate shipping costs. Here's what I did to avoid the wait for the stripped uppers. https://youtu.be/1L52Hl4GJGo Nice, wish I had the machines to do that too. |
|
Left-handed and right-minded!
|
Well, I got the form one in on my lower, I hope this thing isn't a turkey
I was going to use a faxon 10.5" and run suppressed the majority of the time. Will likely try to use a govnah or adjustable gb. Any thoughts on the right buffer/buffer spring? Add me to the list of people waiting for stripped uppers (a left side charger might be cool), and bcg's/spare bolts. |
|
If I had a gun for every ace I've drawn, I could arm a town the size of Abilene.
-Grateful Dead Tu Ne Cede Malis. |
|
|
Originally Posted By Romanfalcon:
Same boat couldn't wait, ordered the full rifle. Cut and pinned the barrel with a Warcomp, e-filed my form 1 just waiting for that and upper parts to become available. http://i95.photobucket.com/albums/l158/romanrod450/408D299F-AC05-4318-A775-A71F0CC798C2_zpsa1xwh1x6.jpg View Quote Did you pull the barrel to cut it? How much of a pain was the hand guard and barrel nut to get loose? |
|
|
I had a local shop do it, Diamondback Shooting sports(always excellent)in Tucson. The gunsmith didn't have any comments on weather it was a pain or not but I am assuming he did pull the barrel. I will ask him to confirm next time I see him.
|
|
|
Originally Posted By Romanfalcon:
I had a local shop do it, Diamondback Shooting sports(always excellent)in Tucson. The gunsmith didn't have any comments on weather it was a pain or not but I am assuming he did pull the barrel. I will ask him to confirm next time I see him. View Quote That rail system does not require clocking the barrel nut, so it can be set to ideal torque, and the attachment method for the rail is pretty simple. |
|
Palmetto State Armory
200 Business Park Blvd Columbia, SC 29203 Web Sales: 1-803-724-6950 [email protected] |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.