User Panel
Posted: 7/11/2016 2:54:02 PM EDT
So, at this time I do not believe I can get my serial number from LT in time to beat the 41F. Which is okay, I know they're incredibly busy etc etc. So I would like to see if anyone that ordered a RO 13" railed upper would be interested in a RO 10.5" railed upper. I want to put together a 14.5" stealth now I think if I can make a trade work with anyone that would like the shorter upper. Also can use this as a forum to trade triggers or anything else that we see in the future on the BuildARs list.
|
|
|
Originally Posted By BBOHACH:
So, at this time I do not believe I can get my serial number from LT in time to beat the 41F. Which is okay, I know they're incredibly busy etc etc. So I would like to see if anyone that ordered a RO 13" railed upper would be interested in a RO 10.5" railed upper. I want to put together a 14.5" stealth now I think if I can make a trade work with anyone that would like the shorter upper. Also can use this as a forum to trade triggers or anything else that we see in the future on the BuildARs list. View Quote So what am I missing on the 41F thing? I thought it just required you to include fingerprint cards and photographs for any responsible parties on the trust (co-trustees) after 13 July. Do you have Adermatoglyphia? |
|
|
Originally Posted By JohnLWare:
So what am I missing on the 41F thing? I thought it just required you to include fingerprint cards and photographs for any responsible parties on the trust (co-trustees) after 13 July. Do you not have fingerprints? View Quote View All Quotes View All Quotes Originally Posted By JohnLWare:
Originally Posted By BBOHACH:
So, at this time I do not believe I can get my serial number from LT in time to beat the 41F. Which is okay, I know they're incredibly busy etc etc. So I would like to see if anyone that ordered a RO 13" railed upper would be interested in a RO 10.5" railed upper. I want to put together a 14.5" stealth now I think if I can make a trade work with anyone that would like the shorter upper. Also can use this as a forum to trade triggers or anything else that we see in the future on the BuildARs list. So what am I missing on the 41F thing? I thought it just required you to include fingerprint cards and photographs for any responsible parties on the trust (co-trustees) after 13 July. Do you not have fingerprints? Nope got rid of them! Don't ask about my past No, I was going to go ahead and send it off before 41F if I could but now that I missed the changes I'm probably not going to send anything off for a while (wife would have to send in info as part of being a responsible person and she doesn't know about all of the current/pending stamps as it is on top of the BuildAR list sooooo think I'm gonna skip that part for now) therefore just trying to build a 14.5 stealth 2.0 if someone desires a trade. |
|
|
Great idea...I was considering posting my trade request in the swag trading forum, but this is more appropriate.
I wasn't planning on building a rifle, but now that the barrel sale has been extended I'd like to build a Larue rifle to go along with my pistol (SBRs still illegal here ). I have a 10" black upper combo with M4 feed ramps and a 10" RO upper set with M4 feed ramps if anyone is interested in trading for a 13" set. RO is preferred, but I'll consider black also. |
|
|
Originally Posted By BBOHACH:
Yeah forgot to mention mine is 10.5" with M4 ramps. Am open to a 13" with or without M4 ramps as to I don't have a barrel yet. <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/A4C572FE-7293-4C21-A411-113A5AD2B853_zpswcheslle.png.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/A4C572FE-7293-4C21-A411-113A5AD2B853_zpswcheslle.png</a> View Quote View All Quotes View All Quotes Originally Posted By BBOHACH:
Originally Posted By icura:
Great idea...I was considering posting my trade request in the swag trading forum, but this is more appropriate. I wasn't planning on building a rifle, but now that the barrel sale has been extended I'd like to build a Larue rifle to go along with my pistol (SBRs still illegal here ). I have a 10" black upper combo with M4 feed ramps and a 10" RO upper set with M4 feed ramps if anyone is interested in trading for a 13" set. RO is preferred, but I'll consider black also. Yeah forgot to mention mine is 10.5" with M4 ramps. Am open to a 13" with or without M4 ramps as to I don't have a barrel yet. <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/A4C572FE-7293-4C21-A411-113A5AD2B853_zpswcheslle.png.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/A4C572FE-7293-4C21-A411-113A5AD2B853_zpswcheslle.png</a> Don't even start, I bought Uppers for the whole family with the intention of doing a family build night |
|
"Oh hell, go ahead and cancel, it's likely not about nuttin'."
I'm an advocate of the 3 chainsaw, two tractor, one wife, one God plan. |
Originally Posted By sea2summit:
Don't even start, I bought Uppers for the whole family with the intention of doing a family build night View Quote View All Quotes View All Quotes Originally Posted By sea2summit:
Originally Posted By BBOHACH:
Originally Posted By icura:
Great idea...I was considering posting my trade request in the swag trading forum, but this is more appropriate. I wasn't planning on building a rifle, but now that the barrel sale has been extended I'd like to build a Larue rifle to go along with my pistol (SBRs still illegal here ). I have a 10" black upper combo with M4 feed ramps and a 10" RO upper set with M4 feed ramps if anyone is interested in trading for a 13" set. RO is preferred, but I'll consider black also. Yeah forgot to mention mine is 10.5" with M4 ramps. Am open to a 13" with or without M4 ramps as to I don't have a barrel yet. <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/A4C572FE-7293-4C21-A411-113A5AD2B853_zpswcheslle.png.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/A4C572FE-7293-4C21-A411-113A5AD2B853_zpswcheslle.png</a> Don't even start, I bought Uppers for the whole family with the intention of doing a family build night Dang, guess you'll have to do it with delton lowers.... |
|
|
Originally Posted By BBOHACH:
Dang, guess you'll have to do it with delton lowers.... View Quote View All Quotes View All Quotes Originally Posted By BBOHACH:
Originally Posted By sea2summit:
Originally Posted By BBOHACH:
Originally Posted By icura:
Great idea...I was considering posting my trade request in the swag trading forum, but this is more appropriate. I wasn't planning on building a rifle, but now that the barrel sale has been extended I'd like to build a Larue rifle to go along with my pistol (SBRs still illegal here ). I have a 10" black upper combo with M4 feed ramps and a 10" RO upper set with M4 feed ramps if anyone is interested in trading for a 13" set. RO is preferred, but I'll consider black also. Yeah forgot to mention mine is 10.5" with M4 ramps. Am open to a 13" with or without M4 ramps as to I don't have a barrel yet. <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/A4C572FE-7293-4C21-A411-113A5AD2B853_zpswcheslle.png.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/A4C572FE-7293-4C21-A411-113A5AD2B853_zpswcheslle.png</a> Don't even start, I bought Uppers for the whole family with the intention of doing a family build night Dang, guess you'll have to do it with delton lowers.... Thinking SMOS... |
|
"Oh hell, go ahead and cancel, it's likely not about nuttin'."
I'm an advocate of the 3 chainsaw, two tractor, one wife, one God plan. |
If anyone wants my 10.5 black 2.0 chasis, when it comes obviously, I'll trade for a predatAR chasis
|
|
|
Originally Posted By sea2summit:
Thinking SMOS... View Quote View All Quotes View All Quotes Originally Posted By sea2summit:
Originally Posted By BBOHACH:
Originally Posted By sea2summit:
Originally Posted By BBOHACH:
Originally Posted By icura:
Great idea...I was considering posting my trade request in the swag trading forum, but this is more appropriate. I wasn't planning on building a rifle, but now that the barrel sale has been extended I'd like to build a Larue rifle to go along with my pistol (SBRs still illegal here ). I have a 10" black upper combo with M4 feed ramps and a 10" RO upper set with M4 feed ramps if anyone is interested in trading for a 13" set. RO is preferred, but I'll consider black also. Yeah forgot to mention mine is 10.5" with M4 ramps. Am open to a 13" with or without M4 ramps as to I don't have a barrel yet. <a href="http://s48.photobucket.com/user/briarsarmor/media/Mobile%20Uploads/A4C572FE-7293-4C21-A411-113A5AD2B853_zpswcheslle.png.html" target="_blank">http://i48.photobucket.com/albums/f205/briarsarmor/Mobile%20Uploads/A4C572FE-7293-4C21-A411-113A5AD2B853_zpswcheslle.png</a> Don't even start, I bought Uppers for the whole family with the intention of doing a family build night Dang, guess you'll have to do it with delton lowers.... Thinking SMOS... They are smashed with orders too. Probably trying to produce LaRue lowers on top of their own stuff. |
|
|
SMOS no longer makes lowers for LT.
Fun fact: SMOS used to make NSR rails and lowers for Noveske. |
|
|
|
"Oh hell, go ahead and cancel, it's likely not about nuttin'."
I'm an advocate of the 3 chainsaw, two tractor, one wife, one God plan. |
Originally Posted By sea2summit:
Amazingly they'll still work with an LT upper View Quote View All Quotes View All Quotes Originally Posted By sea2summit:
Originally Posted By Outrider:
SMOS no longer makes lowers for LT. Fun fact: SMOS used to make NSR rails and lowers for Noveske. Amazingly they'll still work with an LT upper They look good. Same lines etc but just such a fan of that dang outline of Texas. And not so much of that ass on the SMOS |
|
|
Originally Posted By BBOHACH:
They look good. Same lines etc but just such a fan of that dang outline of Texas. And not so much of that ass on the SMOS View Quote View All Quotes View All Quotes Originally Posted By BBOHACH:
Originally Posted By sea2summit:
Originally Posted By Outrider:
SMOS no longer makes lowers for LT. Fun fact: SMOS used to make NSR rails and lowers for Noveske. Amazingly they'll still work with an LT upper They look good. Same lines etc but just such a fan of that dang outline of Texas. And not so much of that ass on the SMOS I placed an order with SMOS the other day. I was talking to the sales manager. They still make LaRue lowers. |
|
|
Originally Posted By kybluegrass78:
I placed an order with SMOS the other day. I was talking to the sales manager. They still make LaRue lowers. View Quote View All Quotes View All Quotes Originally Posted By kybluegrass78:
Originally Posted By BBOHACH:
Originally Posted By sea2summit:
Originally Posted By Outrider:
SMOS no longer makes lowers for LT. Fun fact: SMOS used to make NSR rails and lowers for Noveske. Amazingly they'll still work with an LT upper They look good. Same lines etc but just such a fan of that dang outline of Texas. And not so much of that ass on the SMOS I placed an order with SMOS the other day. I was talking to the sales manager. They still make LaRue lowers. What? I'm not the one that talked to them but find this either hard to believe or very interesting. They may still sell just the same pattern of lowers with their own roll mark on them but doubt they sell ones with the LaRue marked on them. They would have to say grants pass OR |
|
|
Originally Posted By BBOHACH:
What? I'm not the one that talked to them but find this either hard to believe or very interesting. They may still sell just the same pattern of lowers with their own roll mark on them but doubt they sell ones with the LaRue marked on them. They would have to say grants pass OR View Quote View All Quotes View All Quotes Originally Posted By BBOHACH:
Originally Posted By kybluegrass78:
Originally Posted By BBOHACH:
Originally Posted By sea2summit:
Originally Posted By Outrider:
SMOS no longer makes lowers for LT. Fun fact: SMOS used to make NSR rails and lowers for Noveske. Amazingly they'll still work with an LT upper They look good. Same lines etc but just such a fan of that dang outline of Texas. And not so much of that ass on the SMOS I placed an order with SMOS the other day. I was talking to the sales manager. They still make LaRue lowers. What? I'm not the one that talked to them but find this either hard to believe or very interesting. They may still sell just the same pattern of lowers with their own roll mark on them but doubt they sell ones with the LaRue marked on them. They would have to say grants pass OR While I believe that, I don't believe the sales manager would say that |
|
"Oh hell, go ahead and cancel, it's likely not about nuttin'."
I'm an advocate of the 3 chainsaw, two tractor, one wife, one God plan. |
Originally Posted By BBOHACH:
What? I'm not the one that talked to them but find this either hard to believe or very interesting. They may still sell just the same pattern of lowers with their own roll mark on them but doubt they sell ones with the LaRue marked on them. They would have to say grants pass OR View Quote I read that as they still claim to make LaRue's lowers... |
|
|
Originally Posted By BBOHACH:
What? I'm not the one that talked to them but find this either hard to believe or very interesting. They may still sell just the same pattern of lowers with their own roll mark on them but doubt they sell ones with the LaRue marked on them. They would have to say grants pass OR View Quote View All Quotes View All Quotes Originally Posted By BBOHACH:
Originally Posted By kybluegrass78:
Originally Posted By BBOHACH:
Originally Posted By sea2summit:
Originally Posted By Outrider:
SMOS no longer makes lowers for LT. Fun fact: SMOS used to make NSR rails and lowers for Noveske. Amazingly they'll still work with an LT upper They look good. Same lines etc but just such a fan of that dang outline of Texas. And not so much of that ass on the SMOS I placed an order with SMOS the other day. I was talking to the sales manager. They still make LaRue lowers. What? I'm not the one that talked to them but find this either hard to believe or very interesting. They may still sell just the same pattern of lowers with their own roll mark on them but doubt they sell ones with the LaRue marked on them. They would have to say grants pass OR Yeah, they obviously don't sell LaRue marked lowers but SMOS is primarily an OEM manufacture. Their own brand accounts for a tiny sliver of their business. He did say they they have stopped making Noveske branded lowers as of very recently. Apparently, they have moved manufacturing wholly in-house. It's no coincidence that they still sell SMOS branded Noveske Gen III and old style LaRue lowers. |
|
|
Originally Posted By JohnLWare:
I read that as they still claim to make LaRue's lowers... View Quote View All Quotes View All Quotes Originally Posted By JohnLWare:
Originally Posted By BBOHACH:
What? I'm not the one that talked to them but find this either hard to believe or very interesting. They may still sell just the same pattern of lowers with their own roll mark on them but doubt they sell ones with the LaRue marked on them. They would have to say grants pass OR I read that as they still claim to make LaRue's lowers... You read that as intended. It's no knock on LT that they outsource lowers, especially from SMOS. They are awesome at what they do. |
|
|
Originally Posted By kybluegrass78:
You read that as intended. It's no knock on LT that they outsource lowers, especially from SMOS. They are awesome at what they do. View Quote View All Quotes View All Quotes Originally Posted By kybluegrass78:
Originally Posted By JohnLWare:
Originally Posted By BBOHACH:
What? I'm not the one that talked to them but find this either hard to believe or very interesting. They may still sell just the same pattern of lowers with their own roll mark on them but doubt they sell ones with the LaRue marked on them. They would have to say grants pass OR I read that as they still claim to make LaRue's lowers... You read that as intended. It's no knock on LT that they outsource lowers, especially from SMOS. They are awesome at what they do. Well, with the exception of producing RO lowers in time for 41f... |
|
"Oh hell, go ahead and cancel, it's likely not about nuttin'."
I'm an advocate of the 3 chainsaw, two tractor, one wife, one God plan. |
Originally Posted By sea2summit:
Well, with the exception of producing RO lowers in time for 41f... View Quote View All Quotes View All Quotes Originally Posted By sea2summit:
Originally Posted By kybluegrass78:
Originally Posted By JohnLWare:
Originally Posted By BBOHACH:
What? I'm not the one that talked to them but find this either hard to believe or very interesting. They may still sell just the same pattern of lowers with their own roll mark on them but doubt they sell ones with the LaRue marked on them. They would have to say grants pass OR I read that as they still claim to make LaRue's lowers... You read that as intended. It's no knock on LT that they outsource lowers, especially from SMOS. They are awesome at what they do. Well, with the exception of producing RO lowers in time for 41f... He said they are moving at light speed but completely slammed. He said the Orlando shooting pegged the needle. |
|
|
Orlando was after the order window opened, no?
|
|
|
|
Originally Posted By BBOHACH:
What? I'm not the one that talked to them but find this either hard to believe or very interesting. They may still sell just the same pattern of lowers with their own roll mark on them but doubt they sell ones with the LaRue marked on them. They would have to say grants pass OR View Quote View All Quotes View All Quotes Originally Posted By BBOHACH:
Originally Posted By kybluegrass78:
Originally Posted By BBOHACH:
Originally Posted By sea2summit:
Originally Posted By Outrider:
SMOS no longer makes lowers for LT. Fun fact: SMOS used to make NSR rails and lowers for Noveske. Amazingly they'll still work with an LT upper They look good. Same lines etc but just such a fan of that dang outline of Texas. And not so much of that ass on the SMOS I placed an order with SMOS the other day. I was talking to the sales manager. They still make LaRue lowers. What? I'm not the one that talked to them but find this either hard to believe or very interesting. They may still sell just the same pattern of lowers with their own roll mark on them but doubt they sell ones with the LaRue marked on them. They would have to say grants pass OR Negative. The Spartan, and PSA 9mm lowers are made by New Frontier Armory in Las Vegas, but said lowers are marked Hays, KS and Columbia, SC respectfully. Quite a common practice actually. |
|
Team Ranstad - The Fantastic Bastards
Larueminati Tennessee Squire |
Team Ranstad - The Fantastic Bastards
Larueminati Tennessee Squire |
Originally Posted By kybluegrass78: I placed an order with SMOS the other day. I was talking to the sales manager. They still make LaRue lowers. View Quote View All Quotes View All Quotes Originally Posted By kybluegrass78: Originally Posted By BBOHACH: Originally Posted By sea2summit: Originally Posted By Outrider: SMOS no longer makes lowers for LT. Fun fact: SMOS used to make NSR rails and lowers for Noveske. Amazingly they'll still work with an LT upper They look good. Same lines etc but just such a fan of that dang outline of Texas. And not so much of that ass on the SMOS I placed an order with SMOS the other day. I was talking to the sales manager. They still make LaRue lowers. |
|
|
I would be interested in a black 10.5 chassis. I have a PredatAR 16" rifle. I also have a 12" factory SBR 5.56 OBR that is still in NFA prison.
|
|
|
I'm having a few issues with work right now, and I have a strict "last one in, first one out" policy with firearms if I'm forced to part with them. The 2.0 RO might be on the chopping block.
Price check on the following? - Rearden Oxide Stealth 2.0 upper chassis (F/A & dust cover installed) - 16" OBR/tOBR barrel
- PRI Gas Buster Charging Handle - Rearden Oxide Stealth Lower - MBT-2S
- VLTOR A5 H2 Buffer with Sprinco Green Spring and IWC QD End Plate on a LaRue Receiver Extension - A Peg Grip - DelTon Lower Parts Kit All of it is assembled. Just needs a BCG dropped in, a carbine stock, and sights. Basically all the "armorer level" work is done. |
|
"Every argument against machine gun ownership is, at its very core, an assault on the virtue and integrity of the men that would use them." --Undefined
https:////hellerfoundation.org/hvh/ |
IM sent on upper
|
|
|
IM sent as well regarding the whole thing
|
|
|
IM sent!
|
|
NRA Lifetime Member
|
Originally Posted By orpheus762x51:
I'm having a few issues with work right now, and I have a strict "last one in, first one out" policy with firearms if I'm forced to part with them. The 2.0 RO might be on the chopping block. Price check on the following? - Rearden Oxide Stealth 2.0 upper chassis (F/A & dust cover installed) - 16" OBR/tOBR barrel - PRI Gas Buster Charging Handle - Rearden Oxide Stealth Lower - MBT-2S - VLTOR A5 H2 Buffer with Sprinco Green Spring and IWC QD End Plate on a LaRue Receiver Extension - A Peg Grip - DelTon Lower Parts Kit All of it is assembled. Just needs a BCG dropped in, a carbine stock, and sights. Basically all the "armorer level" work is done. View Quote Is that Larue buffer tube/extension a 7.62 model so that it's compatible with the A5 buffer? |
|
|
Originally Posted By kybluegrass78:
Is that Larue buffer tube/extension a 7.62 model so that it's compatible with the A5 buffer? View Quote View All Quotes View All Quotes Originally Posted By kybluegrass78:
Originally Posted By orpheus762x51:
I'm having a few issues with work right now, and I have a strict "last one in, first one out" policy with firearms if I'm forced to part with them. The 2.0 RO might be on the chopping block. Price check on the following? - Rearden Oxide Stealth 2.0 upper chassis (F/A & dust cover installed) - 16" OBR/tOBR barrel - PRI Gas Buster Charging Handle - Rearden Oxide Stealth Lower - MBT-2S - VLTOR A5 H2 Buffer with Sprinco Green Spring and IWC QD End Plate on a LaRue Receiver Extension - A Peg Grip - DelTon Lower Parts Kit All of it is assembled. Just needs a BCG dropped in, a carbine stock, and sights. Basically all the "armorer level" work is done. Is that Larue buffer tube/extension a 7.62 model so that it's compatible with the A5 buffer? It is. Also, calm down a little folks. My reasoning for considering this is because of my current situation with work (or lack there of). I'm willing to sell for a fair price, but don't expect to get a screaming deal. |
|
"Every argument against machine gun ownership is, at its very core, an assault on the virtue and integrity of the men that would use them." --Undefined
https:////hellerfoundation.org/hvh/ |
Originally Posted By orpheus762x51:
It is. Also, calm down a little folks. My reasoning for considering this is because of my current situation with work (or lack there of). I'm willing to sell for a fair price, but don't expect to get a screaming deal. View Quote View All Quotes View All Quotes Originally Posted By orpheus762x51:
Originally Posted By kybluegrass78:
Originally Posted By orpheus762x51:
I'm having a few issues with work right now, and I have a strict "last one in, first one out" policy with firearms if I'm forced to part with them. The 2.0 RO might be on the chopping block. Price check on the following? - Rearden Oxide Stealth 2.0 upper chassis (F/A & dust cover installed) - 16" OBR/tOBR barrel - PRI Gas Buster Charging Handle - Rearden Oxide Stealth Lower - MBT-2S - VLTOR A5 H2 Buffer with Sprinco Green Spring and IWC QD End Plate on a LaRue Receiver Extension - A Peg Grip - DelTon Lower Parts Kit All of it is assembled. Just needs a BCG dropped in, a carbine stock, and sights. Basically all the "armorer level" work is done. Is that Larue buffer tube/extension a 7.62 model so that it's compatible with the A5 buffer? It is. Also, calm down a little folks. My reasoning for considering this is because of my current situation with work (or lack there of). I'm willing to sell for a fair price, but don't expect to get a screaming deal. Hold on to that beast for four more months and list it on the EE. You'll get a fair price. Selling now may trigger kicking yourself. What's your impression of the RO finish? I have a full RO setup coming but so far the pics have left me feeling mixed. Some of those upper receivers look tan while the lower and rail looks gray. |
|
|
Orpheus, would also like to see some pics if you have any
|
|
|
First of all, NOM NOM NOM. Love that RO....like someone else on here said, it's like SCAR FDE.
I do have a question though. What makes the OBR/tOBR barrel different from the Stealth? Is it just the PST gas block and proprietary barrel nut? |
|
|
Originally Posted By Pjatton:
First of all, NOM NOM NOM. Love that RO....like someone else on here said, it's like SCAR FDE. I do have a question though. What makes the OBR/tOBR barrel different from the Stealth? Is it just the PST gas block and proprietary barrel nut? View Quote Both of those things. The barrel but and the PST more specifically |
|
|
Originally Posted By orpheus762x51:
There it is, in all its glory: http://i.imgur.com/uMav0pa.jpg ETA: I really must say, I don't particularly want to part with it. But like I said earlier, I'm pretty close to the point where I don't have a choice. I put a FDE grip on it, but I'll likely change it all to black furniture if I sell it as a complete rifle. ETA 2: Also, I know the chances of this are slim, but I'd pull the barrel for anyone who wants a OBR/tOBR barrel for $550. Those barrels aren't on sale, and I've never seen them on sale. They list for $725. That could help me out and possibly hold me over from having to sell the whole rifle. View Quote I want that so bad. But alas my funds are tied up in a tobr heavy. |
|
|
View Quote Looks like 3 different colors to me. |
|
|
Originally Posted By shark101au:
Looks like 3 different colors to me. View Quote View All Quotes View All Quotes Originally Posted By shark101au:
Looks like 3 different colors to me. yup, wishing i got black, tried to change, no dice, mine will end up in the EE, not just due to that but other reasons as well |
|
|
Originally Posted By BBOHACH:
Both of those things. The barrel but and the PST more specifically View Quote View All Quotes View All Quotes Originally Posted By BBOHACH:
Originally Posted By Pjatton:
First of all, NOM NOM NOM. Love that RO....like someone else on here said, it's like SCAR FDE. I do have a question though. What makes the OBR/tOBR barrel different from the Stealth? Is it just the PST gas block and proprietary barrel nut? Both of those things. The barrel but and the PST more specifically The PST is the way to go if you plan on shooting suppressed. Originally Posted By ozzie839:
Originally Posted By shark101au:
Looks like 3 different colors to me. yup, wishing i got black, tried to change, no dice, mine will end up in the EE, not just due to that but other reasons as well You'd really have to see it in front of you. It doesn't look bad. It actually looks like they used a different alloy or something for the hand guard. I can't put my finger on it, it's just that the metal on the hand guard has a different "grain" to it, if that's the right word. |
|
"Every argument against machine gun ownership is, at its very core, an assault on the virtue and integrity of the men that would use them." --Undefined
https:////hellerfoundation.org/hvh/ |
I had no idea LaRue didn't make his own lowers
|
|
|
|
Originally Posted By ozzie839:
yup, wishing i got black, tried to change, no dice, mine will end up in the EE, not just due to that but other reasons as well View Quote View All Quotes View All Quotes Originally Posted By ozzie839:
Originally Posted By shark101au:
Looks like 3 different colors to me. yup, wishing i got black, tried to change, no dice, mine will end up in the EE, not just due to that but other reasons as well Funny thing I got a stamp back to day. I never though I'd be getting a F4 back before my Q1 BuildAR order........ |
|
|
Originally Posted By shark101au:
Funny thing I got a stamp back to day. I never though I'd be getting a F4 back before my Q1 BuildAR order........ View Quote View All Quotes View All Quotes Originally Posted By shark101au:
Originally Posted By ozzie839:
Originally Posted By shark101au:
Looks like 3 different colors to me. yup, wishing i got black, tried to change, no dice, mine will end up in the EE, not just due to that but other reasons as well Funny thing I got a stamp back to day. I never though I'd be getting a F4 back before my Q1 BuildAR order........ Yes I have also gotten a suppressor approved before getting my Q1 as well |
|
|
double tap
|
|
|
Originally Posted By shark101au:
SMOS also does the Noveske Gen III billet lowers. View Quote View All Quotes View All Quotes Originally Posted By shark101au:
Originally Posted By jeep450:
I had no idea LaRue didn't make his own lowers SMOS also does the Noveske Gen III billet lowers. With the machining capability that LaRue has, why on earth would they farm that out? |
|
|
Originally Posted By jeep450:
With the machining capability that LaRue has, why on earth would they farm that out? View Quote View All Quotes View All Quotes Originally Posted By jeep450:
Originally Posted By shark101au:
Originally Posted By jeep450:
I had no idea LaRue didn't make his own lowers SMOS also does the Noveske Gen III billet lowers. With the machining capability that LaRue has, why on earth would they farm that out? The wait times on these BuildAR's list items may offer some clues. |
|
|
Originally Posted By ozzie839:
yup, wishing i got black, tried to change, no dice, mine will end up in the EE, not just due to that but other reasons as well View Quote View All Quotes View All Quotes Originally Posted By ozzie839:
Originally Posted By shark101au:
Looks like 3 different colors to me. yup, wishing i got black, tried to change, no dice, mine will end up in the EE, not just due to that but other reasons as well Could always cerakote it. |
|
If you seek to do battle with me this day, you will receive the best that I am capable of giving. It may not be enough, but it will be everything I have to give, and it will be impressive.
-B.Terry |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.