User Panel
[#1]
Originally Posted By LaRue_Tactical:
The damn things started shooting too tight of groups to measure, so we reversed the twist about 3/4ths the way down to open them back up enough to separate the occasional bullet. View Quote View All Quotes View All Quotes Originally Posted By LaRue_Tactical:
Originally Posted By Mike_P:
Wtb 260 or 6.5! The damn things started shooting too tight of groups to measure, so we reversed the twist about 3/4ths the way down to open them back up enough to separate the occasional bullet. Any approximate timeline when these barrels will be up on the site to order? |
|
|
[#2]
Originally Posted By Mike_P:
There needs to be a hyperventilating smiley. I'm dying to shoot one. Been sitting on so many reloading components for months now. View Quote View All Quotes View All Quotes Originally Posted By Mike_P:
Originally Posted By LaRue_Tactical:
Originally Posted By Mike_P:
Wtb 260 or 6.5! The damn things started shooting too tight of groups to measure, so we reversed the twist about 3/4ths the way down to open them back up enough to separate the occasional bullet. There needs to be a hyperventilating smiley. I'm dying to shoot one. Been sitting on so many reloading components for months now. Me as well! |
|
Major Captain of Seaborne Party Operations for the North Atlantic Ocean
|
[#3]
Originally Posted By Harley1:
Any approximate timeline when these barrels will be up on the site to order? View Quote View All Quotes View All Quotes Originally Posted By Harley1:
Originally Posted By LaRue_Tactical:
Originally Posted By Mike_P:
Wtb 260 or 6.5! The damn things started shooting too tight of groups to measure, so we reversed the twist about 3/4ths the way down to open them back up enough to separate the occasional bullet. Any approximate timeline when these barrels will be up on the site to order? 'bout two weeks. |
|
"Oh hell, go ahead and cancel, it's likely not about nuttin'."
|
[#4]
^^^
He's right you know ... |
|
I have been asked to point out that I am LaRue Tactical's owner.
My work has been used by tens of thousands of US Military personnel, and tens of thousands of civilian shooters - ML |
[#5]
|
|
|
[#6]
|
|
|
[#7]
Originally Posted By Defender3:
Is that in people weeks or Griffon dag weeks? View Quote View All Quotes View All Quotes Originally Posted By Defender3:
Originally Posted By LaRue_Tactical:
^^^ He's right you know ... Is that in people weeks or Griffon dag weeks? Leander weeks |
|
"Oh hell, go ahead and cancel, it's likely not about nuttin'."
|
[#8]
|
|
|
Buried Susie Derkins under the tire swing.
CA, USA
|
[#9]
Originally Posted By SpeyRod:
Grrrr! I committed to hunting Idaho this year. I am going to have to budget carefully... View Quote View All Quotes View All Quotes Originally Posted By SpeyRod:
Originally Posted By LaRue_Tactical:
^^^ He's right you know ... Grrrr! I committed to hunting Idaho this year. I am going to have to budget carefully... I'm burning 4 points for antelope in Wy this season. |
Trapped by a hideous graknil, Spiff draws his trusty atomic napalm neutralizer. "Chew electric death, snarling cur!"
|
[#10]
|
|
|
[#11]
Originally Posted By mettee:
Hey Mark, Will these require the bolt with smaller diameter firing pin? And what lengths will be available? If I can ask Thanks, Drew View Quote View All Quotes View All Quotes Originally Posted By mettee:
Originally Posted By LaRue_Tactical:
^^^ He's right you know ... Hey Mark, Will these require the bolt with smaller diameter firing pin? And what lengths will be available? If I can ask Thanks, Drew 18" and smaller firing pin not required |
|
I have been asked to point out that I am LaRue Tactical's owner.
My work has been used by tens of thousands of US Military personnel, and tens of thousands of civilian shooters - ML |
[#12]
Originally Posted By LaRue_Tactical:
18" and smaller firing pin not required View Quote View All Quotes View All Quotes Originally Posted By LaRue_Tactical:
Originally Posted By mettee:
Originally Posted By LaRue_Tactical:
^^^ He's right you know ... Hey Mark, Will these require the bolt with smaller diameter firing pin? And what lengths will be available? If I can ask Thanks, Drew 18" and smaller firing pin not required I'm probably pushing it and don't mean to but what if any muzzle velocity have you been seeing out of 18"? I was personally hoping for a 20, even a 22 incher, unless you guys determined the extra length didn't add much? |
|
|
[#13]
Originally Posted By mettee:
I'm probably pushing it and don't mean to but what if any muzzle velocity have you been seeing out of 18"? I was personally hoping for a 20, even a 22 incher, unless you guys determined the extra length didn't add much? View Quote View All Quotes View All Quotes Originally Posted By mettee:
Originally Posted By LaRue_Tactical:
Originally Posted By mettee:
Originally Posted By LaRue_Tactical:
^^^ He's right you know ... Hey Mark, Will these require the bolt with smaller diameter firing pin? And what lengths will be available? If I can ask Thanks, Drew 18" and smaller firing pin not required I'm probably pushing it and don't mean to but what if any muzzle velocity have you been seeing out of 18"? I was personally hoping for a 20, even a 22 incher, unless you guys determined the extra length didn't add much? I was hoping for a 22" bbl also. |
|
ΜΟΛΩΝ ΛΑΒΕ!
It is better to Die Fighting as a Free Man, than to live as a slave to tyranny! NRA LIFE Member, Father to Sons of the Future Revolution. |
[#14]
Originally Posted By mettee:
I'm probably pushing it and don't mean to but what if any muzzle velocity have you been seeing out of 18"? I was personally hoping for a 20, even a 22 incher, unless you guys determined the extra length didn't add much? View Quote View All Quotes View All Quotes Originally Posted By mettee:
Originally Posted By LaRue_Tactical:
Originally Posted By mettee:
Originally Posted By LaRue_Tactical:
^^^ He's right you know ... Hey Mark, Will these require the bolt with smaller diameter firing pin? And what lengths will be available? If I can ask Thanks, Drew 18" and smaller firing pin not required I'm probably pushing it and don't mean to but what if any muzzle velocity have you been seeing out of 18"? I was personally hoping for a 20, even a 22 incher, unless you guys determined the extra length didn't add much? 18" is as short as we could use to get the velocity they wanted to jump out of a tank with. |
|
I have been asked to point out that I am LaRue Tactical's owner.
My work has been used by tens of thousands of US Military personnel, and tens of thousands of civilian shooters - ML |
[#15]
|
|
Proud Member of Team Ranstad
|
[#16]
^^^
Holy sh*t, did that hit what it was aiming at !!! |
|
I have been asked to point out that I am LaRue Tactical's owner.
My work has been used by tens of thousands of US Military personnel, and tens of thousands of civilian shooters - ML |
[#18]
|
|
|
[#19]
|
|
Proud Member of Team Ranstad
|
[#20]
Will the faithful in this thread receive an e-mail warning that the barrels are ready to go?
|
|
|
[#21]
Originally Posted By LaRue_Tactical:
18" is as short as we could use to get the velocity they wanted to jump out of a tank with. View Quote View All Quotes View All Quotes Originally Posted By LaRue_Tactical:
Originally Posted By mettee:
Originally Posted By LaRue_Tactical:
Originally Posted By mettee:
Originally Posted By LaRue_Tactical:
^^^ He's right you know ... Hey Mark, Will these require the bolt with smaller diameter firing pin? And what lengths will be available? If I can ask Thanks, Drew 18" and smaller firing pin not required I'm probably pushing it and don't mean to but what if any muzzle velocity have you been seeing out of 18"? I was personally hoping for a 20, even a 22 incher, unless you guys determined the extra length didn't add much? 18" is as short as we could use to get the velocity they wanted to jump out of a tank with. Could we get a 22" or maybe a 24"? Pretty Please? |
|
I do believe that we have officially graduated from bad advice to a bad advice sandwich. - RedBlueLitez
ARFCOM Call sign: Shovel Mickey Mouse School of Combat Graduate |
[#22]
Originally Posted By LaRue_Tactical:
18" is as short as we could use to get the velocity they wanted to jump out of a tank with. View Quote View All Quotes View All Quotes Originally Posted By LaRue_Tactical:
Originally Posted By mettee:
Originally Posted By LaRue_Tactical:
Originally Posted By mettee:
Originally Posted By LaRue_Tactical:
^^^ He's right you know ... Hey Mark, Will these require the bolt with smaller diameter firing pin? And what lengths will be available? If I can ask Thanks, Drew 18" and smaller firing pin not required I'm probably pushing it and don't mean to but what if any muzzle velocity have you been seeing out of 18"? I was personally hoping for a 20, even a 22 incher, unless you guys determined the extra length didn't add much? 18" is as short as we could use to get the velocity they wanted to jump out of a tank with. Well, I ain't got no tank, and if I did I wouldn't need to jump out with an 18" 260 tobr |
|
|
[#23]
Originally Posted By Cag40Navy:
Could we get a 22" or maybe a 24"? Pretty Please? View Quote View All Quotes View All Quotes Originally Posted By Cag40Navy:
Originally Posted By LaRue_Tactical:
Originally Posted By mettee:
Originally Posted By LaRue_Tactical:
Originally Posted By mettee:
Hey Mark, Will these require the bolt with smaller diameter firing pin? And what lengths will be available? If I can ask Thanks, Drew 18" and smaller firing pin not required I'm probably pushing it and don't mean to but what if any muzzle velocity have you been seeing out of 18"? I was personally hoping for a 20, even a 22 incher, unless you guys determined the extra length didn't add much? 18" is as short as we could use to get the velocity they wanted to jump out of a tank with. Could we get a 22" or maybe a 24"? Pretty Please? Double, super, duper pretty please? |
|
|
[#24]
I'm good with 18,lets get things going
Make sure to add the drop down for the Tranquillo brake. Pete |
|
|
[Last Edit: n00g7]
[#25]
Originally Posted By mettee:
Double, super, duper pretty please? View Quote View All Quotes View All Quotes Originally Posted By mettee:
Originally Posted By Cag40Navy:
Originally Posted By LaRue_Tactical:
Originally Posted By mettee:
Originally Posted By LaRue_Tactical:
18" and smaller firing pin not required I'm probably pushing it and don't mean to but what if any muzzle velocity have you been seeing out of 18"? I was personally hoping for a 20, even a 22 incher, unless you guys determined the extra length didn't add much? 18" is as short as we could use to get the velocity they wanted to jump out of a tank with. Could we get a 22" or maybe a 24"? Pretty Please? Double, super, duper pretty please? And that 22" or 24" in 6.5CM? |
|
|
Buried Susie Derkins under the tire swing.
CA, USA
|
[#26]
Yep. Long tubes here too.
|
Trapped by a hideous graknil, Spiff draws his trusty atomic napalm neutralizer. "Chew electric death, snarling cur!"
|
[#27]
|
|
Avatar by JustJim (not me!)
Scarecrow for itsARanchrifle & clharr Callsign: Elmer You can't argue with the Trumpalos. They'll fling their poo at you.-Stutzcattle |
[#28]
I'm thinking at least a 20.... and maybe a tranquilo to help give it some push
|
|
|
[Last Edit: RFmissile]
[#29]
22" barrels in the works???? |
|
ΜΟΛΩΝ ΛΑΒΕ!
It is better to Die Fighting as a Free Man, than to live as a slave to tyranny! NRA LIFE Member, Father to Sons of the Future Revolution. |
[#30]
I wonder if these will be offered as a cartridge to just do a swap out on the 7.62 P'tobr or just as a bbl? I would hope so. I do not want to go thru swapping out gas blocks and tube if not needed.
|
|
|
[#31]
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.