Has anyone purchased one of the Kit's yet,Comes with MOD0 stock, buffer tube, spring and buffer?
I ask because I recently purchased two. I have installed both and they are incredibly hard to move in and out.
I own several of the Gunfighter stocks and they move in and out with ease, and have from install…..not the MODO. The force required to change stock position
is nothing short of excessive. I am curious if anyone else is having similar results with the new MOD0.
I emailed BCM and they were kind enough to provide a return shipping label, and after receiving them and inspecting, returned them both sating they are within spec.
I have used a micrometer and checked a few of my standard BCM Gunfighters and they measure in at 1.146” when measuring from the 3-9’oclock position.
Measuring the MOD0 I get 1.136 when measuring at the same location, so there is obviously a difference in diameter of the inside of the stock.
Both buffer tubes are the same diameter, old Gunfighter stock works fine on the buffer tubes that came with the MOD0, and the new MOD0 is just as difficult to move on one of the buffer tubes that came with a standard Gunfighter stock.
Again, just curious if others are seeing the same thing.