Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Log In

A valid email is required.
Password is required.
Site Notices
6/21/2017 8:25:40 PM
Posted: 3/16/2001 10:03:19 AM EDT
Another new guy question.... Out on the range last night I noticed something odd. Occasionaly after the initial charging of the first round, the bolt gets hung up on the lip of the mag. If the mag is shaken and pressed *forward* it lets the bolt go and finishes chambering the round. (Hope you guys understand what I’m trying to explain here. Sorry) I’m assuming it has something to do with the mag not being seated properly as wiggling the mag will then “fix” it. Is it normal for the mag to move (slightly) in the mag well? This seems to be the problem. What can I do to “tighten” the fit of the mag in the well? Is it the just the lips on the mag causing this and how can I fix them if it is the mag? This doesn’t just happen with one mag but several. Otherwise, I would have automatically just assumed it was the mag and tossed it. As always, I’d really appreciate any help you guys could offer. Thanks
Link Posted: 3/16/2001 10:13:57 AM EDT
Are your mags USGI? What kind of lower do you have? Aftermarket magazines cause problems in some lowers.
Link Posted: 3/16/2001 10:25:18 AM EDT
The mags are Parsons'. The lower is Colt.
Link Posted: 3/16/2001 10:26:58 AM EDT
I don't know well enough to solve the problem BUT anytime that happens just jab the forward assist with your right thumb- the bolt should snick forward into place. In fact, soldiers are trained to jab the forward assist each time they charge a round, it's a good habit. I'm sure someone here will have a better answer for you.
Link Posted: 3/16/2001 11:07:42 AM EDT
btt
Link Posted: 3/16/2001 12:42:00 PM EDT
btt
Top Top