Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Log In

A valid email is required.
Password is required.
Site Notices
3/20/2017 5:03:23 PM
Posted: 9/30/2001 6:19:44 PM EDT
[Last Edit: 9/30/2001 6:24:40 PM EDT by Imbroglio]
Here a pic of the relocated crossbolt hole and epoxy putty filled previous location. Fortunately I didn't have to move it as far forward as I thought and it didn't go into the handhold groove on the opposite side. [img]wsphotofews.excite.com/001/bA/s9/7a/N285492.jpg[/img] This is a view of the bottom of the stock. The joint where the 2 halves of the stock was glued together was very uneven and in some spots a gap was present. I filed and smoothed down along the entire seam. Notice that the area to the rear of the trigger guard had to be filled in. [img]wsphotofews.excite.com/033/7b/6S/co/VD43612.jpg[/img] Total for all of this stage: 4 hours. Total hours so far 10.5 hours. Next is primer application.
Top Top