Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel

Log In

A valid email is required.
Password is required.
Posted: 7/12/2001 1:41:58 PM EST
Link Posted: 7/12/2001 1:57:48 PM EST
In my opinion, the Dissipator is probably the most functional (shorty with longer sight distance) The 16" Shorty is probably more practical overall. And the 11.5" is going to be a waste of your time. I would much rather have that extra 5.5" of barrel and I have never seen an 11.5" run reliably. Again, this is only my opinion.
Link Posted: 7/12/2001 2:09:07 PM EST
Link Posted: 7/12/2001 2:12:12 PM EST
Link Posted: 7/12/2001 2:18:30 PM EST
16" - especially if it's a preban, you're gonna want an evil collapsible stock no? you have a 20", and 11.5 + 5 = no long ranges IMHO.
Link Posted: 7/12/2001 2:18:50 PM EST
I like the look of Armalites 16" carbine.The mid length stock looks better to me.At least with the fixed stock. [img]http://communities.msn.com/_Secure/0MAAAANwPp3IFu6bvOKSqM50bwevJo1ZZ0*ICqDgPe4G8­sGHaIyYVMRbvJPCPD*x0KFeTg49Je24EAAAAWBMBAw/ArmaLite-15.jpg[/img]
Link Posted: 7/12/2001 2:23:40 PM EST
Link Posted: 7/12/2001 2:57:59 PM EST
I would go with the 16" shorty (M4 style). Tyler
Link Posted: 7/12/2001 4:47:22 PM EST
I know it's not on the list, but... How about the M4 14.5 with the 1.5 inch permanent flash hider? That way you can still attach a bayonet. That M4 with the collapsible stock and the bayonet on the end just looks SO EVIL! Just my .02
Link Posted: 7/12/2001 5:36:24 PM EST
Link Posted: 7/13/2001 2:47:23 PM EST
Link Posted: 7/13/2001 5:11:39 PM EST
Link Posted: 7/13/2001 7:13:23 PM EST
Hmmm... Tough call.... I recently had a bad experience with 2 Bushmaster uppers... A Pre-ban 11.5" HBAR w/ 5.5" pinned flash hider, and a Post-ban 14.5" HBAR w/pinned 1.5" AK brake... The 11.5" barrel NEVER ran right... It was sent back to BM, and still didn't work right... I called BM & spoke to a 'smith, and he said the 11.5" guns either work, or they don't, and he said the gas systems are VERY fussy. I asked him if I should send it back & swap it for a 16" barrel, and he said "That would probably be a good idea" So instead, I traded the gun on a FAL... The 14.5" upper gave me hell right away... The chamber was WAY too tight, and shells were getting stuck in the chamber... I sent it back to BM, and they "Polished" the chamber... Got it back and it worked about 80% It was 'kinda fussy, and never ran 100%... This gun got traded too... The BEST Pre-ban upper I've tried was a 16" DPMS Flat-top with an M4 barrel and a birdcage flash hider... This upper ran 100% right out of the box.... There was a NOTICEABLE difference in quality between the Bushmaster and DPMS barrels... On both of the BM's barrel extensions, it looked like they were old, used, rusty parts that had been glassbeaded... You could see the rust pit marks in the metal... On the other hand, the DPMS barrel extension looked like it was brand new and highly polished... VERY nice stuff... I GUARANTEE YOU my next upper WILL be from DPMS !!! P.S.- Stick with a 16" barrel, the gas curve is much better for cycling reliability...
Link Posted: 7/13/2001 8:38:11 PM EST
Fluted Dissipator.
Top Top