User Panel
Quoted: Is this a Gecko45 thread? View Quote Same with those mindless teenyboppers who go to the Hickory Farms store, and then take double samples of fruitcake and cheeselog, you warn them that they will be charged with a felony(grand theft), and that if they attempt to fight and run, they will be, unfortunately, first tazered, and if they continue to resist violently with intent to maim, then wounded. |
|
Body armor is the least of your worries if you're taking 338 lapua hits.
|
|
Quoted:
Quoted:
Moral of the story, don't get shot with a 338L with or without a plate. Also don't get shot. As mentioned by another poster, that Gecko45 guy - somebody better find that mall ninja and tell him his plan to tape plates to his body to stop multiple 338 rounds isn't going to work |
|
Was the guest shooter that bad of a shot, or was the rifle not sighted in correctly?
|
|
|
|
|
Come on OP, find some one close by with a 300 Rum so I can send you some of these barnes solids to load and shoot....I bet they zing right thru either one at 100 yards...
|
|
Quoted: Come on OP, find some one close by with a 300 Rum so I can send you some of these barnes solids to load and shoot....I bet they zing right thru either one at 100 yards... View Quote This guy had ordered some solid copper bullets back when we shot this, so he was really anxious to try it again with them. I would need new plates though lol |
|
Quoted: I don't think level 4 will stop a 50bmg round...nor will any of that stop a .338 lapua View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Thishttp://i27.photobucket.com/albums/c197/91nx2k/download_zps6elnppho.jpg Out of this http://i27.photobucket.com/albums/c197/91nx2k/Untitled_zpskexzi2dg.jpg vs AR500 Level III+ and Level IV armor @ 100 yards, will they go through? That ammo is listed as 2952 fps. I don't think level 4 will stop a 50bmg round...nor will any of that stop a .338 lapua |
|
Quoted:
I'm working on it! lol This guy had ordered some solid copper bullets back when we shot this, so he was really anxious to try it again with them. I would need new plates though lol View Quote View All Quotes View All Quotes Quoted:
Quoted:
Come on OP, find some one close by with a 300 Rum so I can send you some of these barnes solids to load and shoot....I bet they zing right thru either one at 100 yards... This guy had ordered some solid copper bullets back when we shot this, so he was really anxious to try it again with them. I would need new plates though lol I don't think anyone makes or sells any solids under 9.3 mm anymore due to batfe,.... |
|
Damn. I could have hit that plate with a Mini-14. What's the point of a long range rifle if you yank the trigger like Michael J. Fox on meth?
|
|
Quoted:
What's the recoil like as say compared to a 30-06? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Just when I think I want to sell mine, I see this and go, nah. What's the recoil like as say compared to a 30-06? I'm part recoil junkie so there is that. But all in all not bad. The rifle is heavier than any 06 and that takes a lot of the recoil away. |
|
Quoted:
Come on OP, find some one close by with a 300 Rum so I can send you some of these barnes solids to load and shoot....I bet they zing right thru either one at 100 yards... View Quote Some .30 cal Remington Accelerator sabots loaded with M855 bullets would be cool to see tested. Sort of a poor mans SLAP. |
|
Quoted:
I don't think anyone makes or sells any solids under 9.3 mm anymore due to batfe,.... View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Come on OP, find some one close by with a 300 Rum so I can send you some of these barnes solids to load and shoot....I bet they zing right thru either one at 100 yards... This guy had ordered some solid copper bullets back when we shot this, so he was really anxious to try it again with them. I would need new plates though lol I don't think anyone makes or sells any solids under 9.3 mm anymore due to batfe,.... This place sells them. https://cuttingedgebullets.com/cgi-bin/commerce.cgi?search=action&category=MTAC ETA: Pure copper isn't in the list of banned materials. Brass, bronze, and beryllium copper are though so the ATF tries to fuck with people and claim the bullets have traces of zinc or tin so the are really brass or bronze despite the law clearly saying (excluding the presence of traces of other substances). |
|
|
damn i thought .338lm was tier one able to make hits at over a mile.
you need a new shooter |
|
|
Quoted:
Some .30 cal Remington Accelerator sabots loaded with M855 bullets would be cool to see tested. Sort of a poor mans SLAP. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Come on OP, find some one close by with a 300 Rum so I can send you some of these barnes solids to load and shoot....I bet they zing right thru either one at 100 yards... Some .30 cal Remington Accelerator sabots loaded with M855 bullets would be cool to see tested. Sort of a poor mans SLAP. My 257 roberts AI can do 3600 fps with a 70 gr Barnes solid, which works out to about 3300 fps at 100 yards, 50 fps faster than m193 from the muzzle of a 20" barrel which we know will go though AR500 steel plates like butter at very close ranges. Would still be worthless against real ceramic armor as opposed to repurposed skid steer steel covered in truck bed liner though. |
|
Quoted:
The test shows a 250 gr right? 300 gr .338 LM at 500 Yds on 3/4 inch mild steel- <a href="http://s1201.photobucket.com/user/oneissuevoter/media/C3B12279-3705-4E45-9FB2-3267E7610206.jpg.html" target="_blank">http://i1201.photobucket.com/albums/bb358/oneissuevoter/C3B12279-3705-4E45-9FB2-3267E7610206.jpg</a> Those are Berger hits. Plates don't matter to .338Lm View Quote mild steel also has nothing on hardened steel, fwiw. Not surprised at the large fracture from 10mm's test though. |
|
The question is; at which distance will a lvl3 and lvl4 plate stop a 338LM round?
|
|
|
Quoted:
I'm around 4200 lbs of energy at the muzzle at 2760fps. You can use that as a basis View Quote View All Quotes View All Quotes Quoted:
Quoted:
The question is; at which distance will a lvl3 and lvl4 plate stop a 338LM round? I'm around 4200 lbs of energy at the muzzle at 2760fps. You can use that as a basis My 300 rum shooting the 230 berger target comes in at aprox 4700 lbs of energy at the muzzle at 3050...with 26" tube... I need to run the numbers on the 125 grain barnes solids I loaded for it years ago....OK, going by JBM off a tsx 130 grain(no data available for the 125 solids anymore), should be right at 4700 lbs.at the muzzle at 4050 fps...be interesting to see what some of these big calibers would do...sure wouldn't want to be on the receiving end....plates or not.... |
|
I'm shooting at 300 gr accubond. 96 gr of rl33. I should be around 1900fps at 900 yards
|
|
At what distance does it have the energy of a 30.06 point blank? 600m ish.
06 at the muzzle is about 2800ft lbs of energy- soooo yeah 500 m a level 4 would stop it. But you will have a bad day structurally. |
|
|
Quoted:
Have you by chance tried us 869 or retumbo on it? View Quote View All Quotes View All Quotes Quoted:
Quoted:
I'm shooting at 300 gr accubond. 96 gr of rl33. I should be around 1900fps at 900 yards Have you by chance tried us 869 or retumbo on it? Let me give a correction first. I'm at 96.5 gr of rl33 and I should be above 4600 lbs of energy at the muzzle . 1700 fps at 1000 yards with 2040 lbs of energy. I've tried retumbo. I like it but the rl33 is cheaper and a little faster . I'm running .010 off the lands So the pressure spike gives a much more even powder burn which the rl33 likes . |
|
|
Quoted: At what distance does it have the energy of a 30.06 point blank? 600m ish. 06 at the muzzle is about 2800ft lbs of energy- soooo yeah 500 m a level 4 would stop it. But you will have a bad day structurally. View Quote Yeah, but what would it be out of a Garand? Ed btw; I have a Savage 110BA in .338LM |
|
|
Quoted:
I don't think anyone makes or sells any solids under 9.3 mm anymore due to batfe,.... View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Come on OP, find some one close by with a 300 Rum so I can send you some of these barnes solids to load and shoot....I bet they zing right thru either one at 100 yards... This guy had ordered some solid copper bullets back when we shot this, so he was really anxious to try it again with them. I would need new plates though lol I don't think anyone makes or sells any solids under 9.3 mm anymore due to batfe,.... Do you even Barnes TSX, bro? |
|
|
|
Quoted:
"Michael J. Fox on meth". Mind if I use that line? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Damn. I could have hit that plate with a Mini-14. What's the point of a long range rifle if you yank the trigger like Michael J. Fox on meth? "Michael J. Fox on meth". Mind if I use that line? Be my guest. |
|
|
Great video, homie. The second plate jumping into space made me lol.
Looking at the range made me realize you are quite a ways east from me. Keep 'em coming, please. |
|
|
Quoted:
I am talking the original barnes brass solids... they are a bit tougher then the TSX is..... like these...... <a href="http://s266.photobucket.com/user/AKSNOWRIDER_2008/media/Pictures/IMG_0122_zpsfbf66007.jpg.html" target="_blank">http://i266.photobucket.com/albums/ii265/AKSNOWRIDER_2008/Pictures/IMG_0122_zpsfbf66007.jpg</a> View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Come on OP, find some one close by with a 300 Rum so I can send you some of these barnes solids to load and shoot....I bet they zing right thru either one at 100 yards... This guy had ordered some solid copper bullets back when we shot this, so he was really anxious to try it again with them. I would need new plates though lol I don't think anyone makes or sells any solids under 9.3 mm anymore due to batfe,.... Do you even Barnes TSX, bro? I am talking the original barnes brass solids... they are a bit tougher then the TSX is..... like these...... <a href="http://s266.photobucket.com/user/AKSNOWRIDER_2008/media/Pictures/IMG_0122_zpsfbf66007.jpg.html" target="_blank">http://i266.photobucket.com/albums/ii265/AKSNOWRIDER_2008/Pictures/IMG_0122_zpsfbf66007.jpg</a> ive yet to jump on the barnes wagon. im still in the development stages of my .338 loads so i may give them a try. ive seen a few failures and read about a few more. ( hunting failures) i know they fly well though |
|
|
Quoted: Great video, homie. The second plate jumping into space made me lol. Looking at the range made me realize you are quite a ways east from me. Keep 'em coming, please. View Quote |
|
Quoted:
The test shows a 250 gr right? 300 gr .338 LM at 500 Yds on 3/4 inch mild steel- <a href="http://s1201.photobucket.com/user/oneissuevoter/media/C3B12279-3705-4E45-9FB2-3267E7610206.jpg.html" target="_blank">http://i1201.photobucket.com/albums/bb358/oneissuevoter/C3B12279-3705-4E45-9FB2-3267E7610206.jpg</a> Those are Berger hits. View Quote Berger than what? |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.