Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Log In

A valid email is required.
Password is required.
Posted: 4/20/2001 1:36:09 PM EST
Hi all, there was a discussion at the local range about cleaning of the ar15s gas system. Some say that it doesnt need to be done others do. i checked my ar book and it didnt go into cleaning of the gas system at all. my question is: if and when do you need to clean the gas system? thanks
Link Posted: 4/20/2001 1:43:31 PM EST
Link Posted: 4/20/2001 1:50:58 PM EST
It isn't really necessary however; it would not hurt to run a gas tube 'mop' down it every once and a while. Numerous places sell them, I know Tapco has them. I have never used them but they look similar to a pipe cleaner.
Link Posted: 4/20/2001 7:56:09 PM EST
When you wear out the barrel and replace it. Unless you're shooting really shitty ammo, in which case, who knows?
Link Posted: 4/20/2001 8:03:03 PM EST
Link Posted: 4/20/2001 8:18:42 PM EST
[Last Edit: 4/20/2001 8:18:10 PM EST by Tippie]
The last time I cleaned a gas system (on an M16/AR) was 1985. Lew
Link Posted: 4/20/2001 10:31:59 PM EST
Prune Juice will Set You Free!!!! Sorry, I couldn't resist.
Link Posted: 4/21/2001 5:21:33 AM EST
In the Manual it says to keep the weapon in an upright position while cleaning the bore, that way crud and solvents dont get into the tube or plug the vent hole in the barrel. I have never cleaned mine.
Link Posted: 4/21/2001 5:25:37 AM EST
I don't know what i pipe cleaner will do that 50,000 psi gas pressure won't............
Link Posted: 4/21/2001 5:43:20 AM EST
Originally Posted By paspecops: I don't know what i pipe cleaner will do that 50,000 psi gas pressure won't............
View Quote
Exactly
Link Posted: 4/21/2001 5:47:57 AM EST
Yes it is self cleaning. As previously stated if your shooting a 22 rimfire conversion rig lead can build up in the gas tube. After every couple of hundred rounds or so convert back to .223 and fire a couple rounds down range and this will clean out the gas system. Running pipe cleaners down it every once in awhile won't hurt anything.
Link Posted: 4/21/2001 5:55:02 AM EST
Link Posted: 4/21/2001 6:27:40 AM EST
After only 3500 rds, Slayer? That seems like either you have a bad case of ammunition, or something it just generally WRONG with the gas line. I'm no expert on this, but some people will open up their port on the tube a little bit, about 1/100 of an inch larger than standard. See if you can send the assembly back to them (or in the hands of professionals) to open up that gas port a little bit, that will probably clear up. Jew~
Link Posted: 4/21/2001 10:09:46 AM EST
I would think potting a pipe cleaner down the gas tube would eventually cause a pile-up of debris at the end of the tube that could potentially block the gas port.
Top Top