User Panel
User Panel
User Panel
|
Posted: 4/8/2014 8:51:49 PM EDT
[#1]
Quote HistoryQuoted:
This. Only reason you'd need a really high end trigger is for precision work at distance. You don't particularly notice the grit and grind when you're putting pairs in center mass at fifteen yards, especially not if you're wearing gloves. Those $300 triggers may feel nice, might even shrink your groups by a quarter inch at a hundred yards, but that's over half the price of an Aimpoint. No, thank you. I prefer the thousand-round trigger job, myself. Nice, smooth and predictable. Quote HistoryQuoted:
Quoted:
Hell no. Fancy triggers are for sissies. This. Only reason you'd need a really high end trigger is for precision work at distance. You don't particularly notice the grit and grind when you're putting pairs in center mass at fifteen yards, especially not if you're wearing gloves. Those $300 triggers may feel nice, might even shrink your groups by a quarter inch at a hundred yards, but that's over half the price of an Aimpoint. No, thank you. I prefer the thousand-round trigger job, myself. Nice, smooth and predictable. How much does a case of ammo cost these days? 
|
|
|
|
Posted: 4/8/2014 8:53:06 PM EDT
[#2]
No honest man needs a trigger like that.
|
|
|
|
Posted: 4/8/2014 8:54:22 PM EDT
[#3]
I could definitely go for a SD-C/SD-3G selectable trigger.
|
|
|
|
Posted: 4/8/2014 9:01:31 PM EDT
[#4]
Would buy. Probably more than one. |
|
|
|
Posted: 4/8/2014 9:02:57 PM EDT
[#5]
Quote HistoryQuoted:
I could definitely go for a SD-C/SD-3G selectable trigger. 
|
|
|
|
Posted: 4/8/2014 9:04:57 PM EDT
[#6]
Quote HistoryQuoted:
Not at $500. $300 maybe. Might go as high as $350 but $500? Really? |
|
|
|
Posted: 4/8/2014 9:05:56 PM EDT
[#7]
Fuck yes, for $300ish. I'm a sissy for $500
|
|
|
|
Posted: 4/8/2014 9:06:54 PM EDT
[#8]
No.
|
|
|
|
Posted: 4/8/2014 9:08:10 PM EDT
[#9]
Times ten
|
|
|
|
Posted: 4/8/2014 9:11:15 PM EDT
[#10]
Tag. In for my free trigger when it hits the market, since it was my idea.
BTW...I just built a new rifle using an SSA-E and love the trigger. The MK4 rail is very nice too! I am digging this rifle, alot. 
|
|
|
|
Posted: 4/8/2014 9:12:55 PM EDT
[#11]
Quote HistoryQuoted:
Quote HistoryQuoted:
Quoted:
I could definitely go for a SD-C/SD-3G selectable trigger. On second thought I've reconsidered this as it would cost me thousands to replace the SD-Cs that I currently have.
|
|
|
|
Posted: 4/8/2014 9:13:29 PM EDT
[#12]
Why do these threads pop up AFTER I already bought the current product?
  |
|
|
|
Posted: 4/8/2014 9:15:19 PM EDT
[#13]
I'd be in for a couple.
|
|
|
|
Posted: 4/8/2014 9:20:31 PM EDT
[#14]
Quote HistoryQuoted:
How much does a case of ammo cost these days?
Quote HistoryQuoted:
Quoted:
Quoted:
Hell no. Fancy triggers are for sissies. This. Only reason you'd need a really high end trigger is for precision work at distance. You don't particularly notice the grit and grind when you're putting pairs in center mass at fifteen yards, especially not if you're wearing gloves. Those $300 triggers may feel nice, might even shrink your groups by a quarter inch at a hundred yards, but that's over half the price of an Aimpoint. No, thank you. I prefer the thousand-round trigger job, myself. Nice, smooth and predictable. How much does a case of ammo cost these days?
My LMT trigger(s) were bad at the beginning, and bad 2+ cases of ammo later. I was once a "why spend the $" guy. Then I realized that life is short, and I'd be happier putting fewer rounds downrange with a nicer trigger instead of waiting for some magical event that never happened. My groups in a carbine class shrank so dramatically after a trigger swap that multiple people asked what happened overnight to make me such a better shot. Would I buy the trigger described? Probably. It would go nicely with my SSAs, SSF, and S3G. |
|
|
|
Posted: 4/8/2014 9:24:25 PM EDT
[#15]
Quote HistoryQuoted:
after what they did for a member and his family here? yes. yes i would. Thread? I already think Geissele is a great company. Curious for details on this. |
|
|
|
Posted: 4/8/2014 9:24:58 PM EDT
[#16]
for all the full auto I did with my M16A2 .. it was a waste of ammo and one dirty weapon afterwards .
Quote HistoryQuoted:
No. Full auto and anything simulating full auto is more of a novelty than actually something being useful to me. Hell no for $500. |
|
|
|
Posted: 4/8/2014 9:28:12 PM EDT
[#17]
Quote HistoryQuoted:
SSA/S3G two-in-one combo unit? You bet your ass I would buy that! |
|
|
|
Posted: 4/8/2014 9:41:41 PM EDT
[#18]
I would want one for my my SR762.... Position 1 should be a standard weight... position 2 should be a light trigger... I want that for when I go long distance shooting... Sorta like a set trigger of old days to minimize rifle shake...
|
|
|
|
Posted: 4/8/2014 9:43:08 PM EDT
[#19]
Quote HistoryQuoted:
I could definitely go for a SD-C/SD-3G selectable trigger. This. I would buy one for every AR I own. Does Geiselle finance?? |
|
|
|
Posted: 4/8/2014 9:49:26 PM EDT
[#20]
Quote HistoryQuoted:
This. I would buy one for every AR I own. Does Geiselle finance?? Quote HistoryQuoted:
Quoted:
I could definitely go for a SD-C/SD-3G selectable trigger. This. I would buy one for every AR I own. Does Geiselle finance?? I need layaway. |
|
|
|
Posted: 4/8/2014 9:57:33 PM EDT
[#21]
I'd rather he build a 2 stage Rem 700 trigger.
|
|
|
|
Posted: 4/8/2014 9:58:38 PM EDT
[#22]
Quote HistoryQuoted:
I'd rather he build a 2 stage Rem 700 trigger. Yes, that first. |
|
|
|
Posted: 4/8/2014 10:05:35 PM EDT
[#23]
$500 for a trigger? i can buy a laptop, an DSLR with lens with that much money, they have the balls to think a few pieces of metal will cost that much lol
is there a patent for that? if not, folks lets DIY |
|
|
|
Posted: 4/8/2014 10:09:27 PM EDT
[#24]
Quote HistoryQuoted: $500 for a trigger? i can buy a laptop, an DSLR with lens with that much money, they have the balls to think a few pieces of metal will cost that much lol is there a patent for that? if not, folks lets DIY  |
|
|
|
Posted: 4/8/2014 10:10:43 PM EDT
[#25]
No. I have no use for gimmicks.
|
|
|
|
Posted: 4/8/2014 10:10:48 PM EDT
[#26]
At least 4.
|
|
|
|
Posted: 4/8/2014 10:11:51 PM EDT
[#27]
Quote HistoryQuoted:
You're delusional if you think you can make your own in your little harbor freight workshop. Also if you read, Geissele said $325. Quote HistoryQuoted:
Quoted:
$500 for a trigger? i can buy a laptop, an DSLR with lens with that much money, they have the balls to think a few pieces of metal will cost that much lol
is there a patent for that? if not, folks lets DIY i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable 
or maybe chinese company can make it for $10
|
|
|
|
Posted: 4/8/2014 10:13:53 PM EDT
[#28]
Quote HistoryQuoted:
i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable
or maybe chinese company can make it for $10 Quote HistoryQuoted:
Quoted:
Quoted:
$500 for a trigger? i can buy a laptop, an DSLR with lens with that much money, they have the balls to think a few pieces of metal will cost that much lol
is there a patent for that? if not, folks lets DIY i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable
or maybe chinese company can make it for $10 Yeah, you'd fuck it up. |
|
|
|
Posted: 4/8/2014 10:14:24 PM EDT
[#29]
Quote HistoryQuoted: i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable or maybe chinese company can make it for $10 Quote HistoryQuoted: Quoted: Quoted: $500 for a trigger? i can buy a laptop, an DSLR with lens with that much money, they have the balls to think a few pieces of metal will cost that much lol is there a patent for that? if not, folks lets DIY i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable or maybe chinese company can make it for $10  |
|
|
|
Posted: 4/8/2014 10:14:26 PM EDT
[#30]
Quote HistoryQuoted:
i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable
or maybe chinese company can make it for $10 Quote HistoryQuoted:
Quoted:
Quoted:
$500 for a trigger? i can buy a laptop, an DSLR with lens with that much money, they have the balls to think a few pieces of metal will cost that much lol
is there a patent for that? if not, folks lets DIY i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable
or maybe chinese company can make it for $10 
You cannot DIY a Geissele trigger. If you can, you are working in the wrong industry and should be a professional machinist and gunsmith. |
|
|
|
Posted: 4/8/2014 10:15:19 PM EDT
[#31]
Quote HistoryQuoted:
Yeah, you'd fuck it up. Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
$500 for a trigger? i can buy a laptop, an DSLR with lens with that much money, they have the balls to think a few pieces of metal will cost that much lol
is there a patent for that? if not, folks lets DIY i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable
or maybe chinese company can make it for $10 Yeah, you'd fuck it up. so? cost maybe a few bucks in material |
|
|
|
Posted: 4/8/2014 10:16:30 PM EDT
[#32]
Quote HistoryQuoted:
i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable
or maybe chinese company can make it for $10 Quote HistoryQuoted:
Quoted:
Quoted:
$500 for a trigger? i can buy a laptop, an DSLR with lens with that much money, they have the balls to think a few pieces of metal will cost that much lol
is there a patent for that? if not, folks lets DIY i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable
or maybe chinese company can make it for $10 You go ahead and try to run CNC machines and EDM machines for $10. As well as using quality materials. Good luck. |
|
|
|
Posted: 4/8/2014 10:16:47 PM EDT
[#33]
Quote HistoryQuoted:
Quote HistoryQuoted:
Quoted:
Not at $500. $300 maybe. |
|
|
|
Posted: 4/8/2014 10:16:53 PM EDT
[#34]
Quote HistoryQuoted:
Would you buy one if its 2 stage/1 stage or like the TacCon? BTW-the $500 is out unless the trigger was way, way complicated. No way I can see it being that much unless volumes are really low. More like $325ish Quote HistoryQuoted:
Quoted:
Quoted:
Some people have asked Bill Geissele about the possibility of engineering a trigger similar to the TacCon trigger, i.e. selectable where semi would be a two stage like the SSA and auto would be a very light single stage like the 3 gun trigger. See the thread discussing it here: http://www.ar15.com/forums/t_2_444/243034_Question_for_Geissele___This_trigger_design_would_be_awesome.html Mr Geissele has questioned if there would even be a market for such a trigger. Please vote "Yes" if you would buy and "No" if you would not. For the sake of discussion assume the trigger would cost approximately $500. Fuck yes. I actually bought 2 Aero lowers with the 3rd selector mark in anticipation of the Tac Con trigger. Reviews were lousy enough that I figured I'd wait until a real deal pops up on EE to grab one and try it. If Geissele made one, I'd buy two. Tell him I want to know where to pre order. Would you buy one if its 2 stage/1 stage or like the TacCon? BTW-the $500 is out unless the trigger was way, way complicated. No way I can see it being that much unless volumes are really low. More like $325ish SDE and sd3g. $325 done tell me when to send the check. I'll take 2 err... Maybe 1 this month and 1 next. Easier to hide from the accountant. |
|
|
|
Posted: 4/8/2014 10:16:58 PM EDT
[#35]
Quote HistoryQuoted:
so? cost maybe a few bucks in material Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Quoted:
$500 for a trigger? i can buy a laptop, an DSLR with lens with that much money, they have the balls to think a few pieces of metal will cost that much lol
is there a patent for that? if not, folks lets DIY i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable
or maybe chinese company can make it for $10 Yeah, you'd fuck it up. so? cost maybe a few bucks in material So? It'd be about as close to the actual thing as a Fiero is to a Ferrari. But hey, if it weren't for ignorance then GD would be far less amusing, so carry on... |
|
|
|
Posted: 4/8/2014 10:17:28 PM EDT
[#36]
Quote HistoryQuoted:
so? cost maybe a few bucks in material Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Quoted:
$500 for a trigger? i can buy a laptop, an DSLR with lens with that much money, they have the balls to think a few pieces of metal will cost that much lol
is there a patent for that? if not, folks lets DIY i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable
or maybe chinese company can make it for $10 Yeah, you'd fuck it up. so? cost maybe a few bucks in material A few bucks in materials, a few hundred grand in tools and R&D. |
|
|
|
Posted: 4/8/2014 10:19:04 PM EDT
[#37]
Quote HistoryQuoted:
You cannot DIY a Geissele trigger. If you can, you are working in the wrong industry and should be a professional machinist and gunsmith. Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
$500 for a trigger? i can buy a laptop, an DSLR with lens with that much money, they have the balls to think a few pieces of metal will cost that much lol
is there a patent for that? if not, folks lets DIY i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable
or maybe chinese company can make it for $10
You cannot DIY a Geissele trigger. If you can, you are working in the wrong industry and should be a professional machinist and gunsmith. seriously i respect IP, i think the original company that comes up with this idea should patent it, or can charge high price for it, it's their invention, but for any other company that just copy the idea and still charge so much money, no excuse or respect for that |
|
|
|
Posted: 4/8/2014 10:19:51 PM EDT
[#38]
We have allowed troll to take thread totally off track. Let him build one for himself, the rest of us can waste our money on a Geiselle trigger.
|
|
|
|
Posted: 4/8/2014 10:21:12 PM EDT
[#39]
Quote HistoryQuoted: seriously i respect IP, i think the original company that comes up with this idea should patent it, or can charge high price for it, it's their invention, but for any other company that just copy the idea and still charge so much money, no excuse or respect for that Quote HistoryQuoted: Quoted: Quoted: Quoted: Quoted: $500 for a trigger? i can buy a laptop, an DSLR with lens with that much money, they have the balls to think a few pieces of metal will cost that much lol is there a patent for that? if not, folks lets DIY i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable or maybe chinese company can make it for $10 You cannot DIY a Geissele trigger. If you can, you are working in the wrong industry and should be a professional machinist and gunsmith. seriously i respect IP, i think the original company that comes up with this idea should patent it, or can charge high price for it, it's their invention, but for any other company that just copy the idea and still charge so much money, no excuse or respect for that |
|
|
|
Posted: 4/8/2014 10:24:52 PM EDT
[#40]
Quote HistoryQuoted:
You mean like you were proposing a couple of posts back? Quote HistoryQuoted:
Quoted:
Quoted:
Quoted:
Quoted:
You're delusional if you think you can make your own in your little harbor freight workshop. Also if you read, Geissele said $325. i know i can't DIY laptop or DSLR, there are just too many chips and too much technology in them but 3 simple pieces of metal made of steel (not gold, mind you)? surely doable
or maybe chinese company can make it for $10
You cannot DIY a Geissele trigger. If you can, you are working in the wrong industry and should be a professional machinist and gunsmith. seriously i respect IP, i think the original company that comes up with this idea should patent it, or can charge high price for it, it's their invention, but for any other company that just copy the idea and still charge so much money, no excuse or respect for that did i say i want to make it and charge $500? if chinese company makes it, at least they only charge minimum money, so add value to the consumers |
|
|
|
Posted: 4/8/2014 10:27:53 PM EDT
[#41]
Quote HistoryQuoted: did i say i want to make it and charge $500? Quote HistoryQuoted: Quoted: Quoted: Quoted: You cannot DIY a Geissele trigger. If you can, you are working in the wrong industry and should be a professional machinist and gunsmith. seriously i respect IP, i think the original company that comes up with this idea should patent it, or can charge high price for it, it's their invention, but for any other company that just copy the idea and still charge so much money, no excuse or respect for that did i say i want to make it and charge $500? |
|
|
|
Posted: 4/8/2014 10:29:49 PM EDT
[#42]
Quote HistoryQuoted:
No. Full auto and anything simulating full auto is more of a novelty than actually something being useful to me. Hell no for $500. This. And with the quality of his current triggers, I'd have no need for it at all. Waste of time and money. |
|
|
|
Posted: 4/8/2014 10:30:05 PM EDT
[#43]
Quote HistoryQuoted:
We have allowed troll to take thread totally off track. Let him build one for himself, the rest of us can waste our money on a Geiselle trigger. I'm with you on the first part, but I disagree with the second. One does not "waste" money on a Geiselle trigger.
|
|
|
|
Posted: 4/8/2014 10:31:38 PM EDT
[#44]
Quote HistoryQuoted: I'm with you on the first part, but I disagree with the second. One does not "waste" money on a Geiselle trigger. Quote HistoryQuoted: Quoted: We have allowed troll to take thread totally off track. Let him build one for himself, the rest of us can waste our money on a Geiselle trigger. I'm with you on the first part, but I disagree with the second. One does not "waste" money on a Geiselle trigger. |
|
|
|
Posted: 4/8/2014 10:32:25 PM EDT
[#45]
Quote HistoryQuoted: This. And with the quality of his current triggers, I'd have no need for it at all. Waste of time and money. Quote HistoryQuoted: Quoted: No. Full auto and anything simulating full auto is more of a novelty than actually something being useful to me. Hell no for $500. This. And with the quality of his current triggers, I'd have no need for it at all. Waste of time and money. |
|
|
|
Posted: 4/8/2014 10:33:27 PM EDT
[#46]
Quote HistoryQuoted:
Yes but not for $500. It's a tiny piece of metal with springs... there's no reason it should cost that much. It's what... MAYBE $20 in materials? ...and untold hundreds of hours in development not to include machining cost. |
|
|
|
Posted: 4/8/2014 10:33:34 PM EDT
[#47]
Quote HistoryQuoted:
I want suppressive fire for the masses, damnit! Quote HistoryQuoted:
Quoted:
Quoted:
No. Full auto and anything simulating full auto is more of a novelty than actually something being useful to me. Hell no for $500. This. And with the quality of his current triggers, I'd have no need for it at all. Waste of time and money. Me too. But if Bill is going to work on new triggers, I'd want one cheap enough to go into my production rifles.
|
|
|
|
Posted: 4/8/2014 10:41:44 PM EDT
[#48]
Nope, not for $500. Maybe for $300, maybe...
|
|
|
|
Posted: 4/8/2014 10:43:28 PM EDT
[#49]
Quote HistoryQuoted: Nope, not for $500. Maybe for $300, maybe... |
|
|
|
Posted: 4/8/2014 10:47:03 PM EDT
[#50]
Quote HistoryQuoted: And maybe another $20 in R&D and engineering. Pfft! Quote HistoryQuoted: Quoted: Yes but not for $500. It's a tiny piece of metal with springs... there's no reason it should cost that much. It's what... MAYBE $20 in materials? And maybe another $20 in R&D and engineering. Pfft! |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
