The TNVC TM14 Mk2 is a lightweight, low profile mounting solution for
the standard issue AN/PVS-14 Night Vision Monocular. It is designed to
allow rapid attach and detach from the Aimpoint Twist Mount Base. The
TM14 Mk2 is the lightest and least obtrusive mount for the PVS-14. It
clamps around the PVS-14 Objective Lens Locking Ring and has a
low-profile footprint for interfacing with the Aimpoint Twist Mount base
(sold separately). The footprint faces forward under the objective
lens, allowing the operator to quickly and easily index the unit into
place. Its low profile ring locks with a single machine screw located at
the base, leaving an uninterrupted band around the objective lens
housing. This feature keeps the TM-14 Mk2 from interfering with the Gain
Knob and IR Illuminator.
The purpose of the TM14 Mk2 is to provide an ultra-fast and secure
method of transitioning a PVS-14 between a helmet and weapon mount. The
placement of the adapter allows both the TM14 Mk2 and J-Arm to stay on
the optic at all times. This allows the PVS-14 to transition in seconds
and requires the use of only one hand! Today’s modern battlefield is
seeing bad guys with night vision too. More and more, the Warfighter and
Law Enforcement Professional is needing to go passive with his or her
NV because IR lasers broadcast their position from a long way off. The
ability to transition from active to passive NV deployment is essential,
allowing the good guys to stay a step ahead. Drawing from our own
experience and implementing feedback from the front lines, we designed
the TM14 Mk2 to be the most versatile, low profile, and practical
mounting solution for the PVS-14.
As a follow up to the wildly popular original TM14, the TM14 Mk2
boasts some new small features that provide big benefits to the user.
The first upgrade is the addition of an integrated lanyard loop. It’s
always a good idea to dummy cord your night vision goggle to your helmet
or weapon system. The lanyard loop provides a solid, low profile
attachment point for this application. It is offset so as to not
interfere with the goggle’s IR Illuminator, fitting underneath the
J-Arm. Simply attach a small loop of 550 cord or a zip tie to the TM14
Mk2 and run your lanyard straight to it. If using a straight J-Arm,
such as the Wilcox PVS-14 Adapter Arm or the Norotos Dual Dovetail
Adapter, you can attach your lanyard directly to the TM14 because it
will not be covered.
Next, the Mk2 features an improved angle on the underside ramp to
facilitate indexing it onto the Aimpoint Twist Mount Base. Material has
also been removed from the underside of the unit to decrease weight.
Lastly, all edges around the ring have been reduced with a more
pronounced chamfer to make them less sharp. We have no doubt you will
love the improvements found in the TM14 Mk2.