Quote History View Quote View All Quotes
View All Quotes
Quote History
I'll look for service manuals for the PRO-2053...
What I found... Quote...
http://marksscanners.com/95/95.shtml#change_receive_modes
Easier to Read
Pro-93/2053/95 Scanner Manual
Last Updated December 25, 2015
Changing Receive Modes
The scanner is preset to the most common AM or FM receive mode for each frequency range. The preset mode is correct in most cases. However, some amateur radio transmissions and trunked systems do not operate in the preset mode. If you try to listen to a transmission when the scanner is not set to the correct receive mode, the transmission might sound weak or distorted.
To change the Receive Mode of a channel, select the channel in manual mode by entering the bank number and channel number (Ex: 001) then press MANUAL to advance to the channel. Press MODE until the desired mode is found.
Note: You cannot change the receive mode of a non-trunked channel to MO or ED.
Or, if the scanner is scanning and stops on an active channel, quickly press MODE to change the mode.
To change the Receive Mode of a limit search, press MODE while searching. FM or AM will blink and the scanner will stay in the selected mode even if the search moves into a different band. For example, if you search from 53.000 to 110.000 and change the receive mode to AM, the scanner will stay in AM mode while searching 53-54 also. To set the scanner to use the default mode in the band, press FUNC then MODE. The receive mode will stop blinking and the scanner will switch to the proper mode when searching the band.
Note: You cannot change the receive mode of search banks SR0-SR4.