What variant is the IO Inc Sporter Wood

5/5/2013 12:07:04 PM

I bought a IO Inc Sporter Wood, and I'm curious about which AK this rifle is patte...

NEED HELP TO REPLACE EXISTING STOCK

5/3/2013 10:25:59 PM

I want to replace my existing stock on my Century 39 Sporter rifle. However I am having difficulties finding any info on how I go about doing it. My goal is to replace the existing stock with an AR milspec buffer tube so i can install an AR type ...

Krinkov Lower Hg Lever Help

5/3/2013 8:46:38 PM

My brother just got his Bulgarian 7.62 Krinkov back from the builder and it looks amazing, but is having some issues with the lower latch not working right. In an attempt to fix it (he is not exactly mechanically inclined)he has marred his barre...

Just bought one of those Polish 90 recievers from SPG

5/2/2013 6:49:51 PM

I ordered this blank from the Sportsman's Guide the other day. I got it in today, and all the appropriate cutouts are there, all the dimple...

Need someone to Re barrel my Tantal

4/29/2013 5:22:26 PM

Well I have had a Tantal for a while and just never got around to shooting it. It appears that I got a dreaded Keyholeing tantal. So I guess I need to put in a new barrel. I have zero knowledge on working on the AK platform. Is Green...

US fcg

4/29/2013 2:22:05 PM

Just curious what US made fcg parts everyone is using nowadays, is it still the tapco g2?

UPDATE who suggested Matt Yeamans to build my Krink THANK YOU

4/29/2013 2:04:43 AM

well i got the guys info off a member here and sent him my kit about 2 months ago now, no returned emails or phone calls so...... this guy legit? oh ya and i also paid him as he said it would only take a few weeks to do.

builds with other than factory chamberings

4/28/2013 2:24:45 PM

I was thinking after checking on the status of a 6.5 grendel ak about homebuilding and this led me to wondering if there were other folks out there who had or would like to build something in another caliber . There are boltfaces available for ...

Time to buy an Ak74 barrel

4/26/2013 10:39:13 AM

I want to start gathering the parts to build my Ak74. I want a US made barrel. I've looked at all the vendors to see what is what. Right now, Brownells has high standard barrels back in stock. I'm looking for accuracy on par with a...

Any Alaskan builders that can headspace and drill barrel pin

4/25/2013 5:13:00 AM

Just wanted to see if there were any guys out there with the tooling up here in Alaska to headspace a barrel and drill the barrel pin. Just in case things don't go to well with the previous post of the obstructed barrel. I am located in anchorage.

Centerfire Systems Yugo M70 Barrel Report 29 used as is take off barrels

4/25/2013 12:20:17 AM

So I went on in for a game of barrel roulette. Ordered 5 of the $29 YUGO barrels from Centerfire. It cost $160 with shipping, or about what a brand new Green Mountain standard AKM profile chrome lined tube would cost once shippin...

Milled receiver manufacturer

4/22/2013 8:38:41 PM

I'm looking for a milled receiver for a Bulgarian AK-47 fixed stock. There are a few links I've found going through forum posts, among them are Firing Line and Lancaster Arms. For the past few months I've been checking the Firing Line website bu...

Need advice on buying a kit that has a chamber obstruction

4/20/2013 5:59:19 PM

I have the opportunity to pick up a Romy G demilled kit from a local guy for $375. After talking to him apparently when his buddy and him were pushing the barrel out of the trunnion the brass nut they were using go pushed into the chamber (which ...

Noob AK builing logistic questions

4/20/2013 3:05:44 PM

Hey all, I have 3 kits I'm finishing getting parts and tools in to build these kits up and have read a lot on how it is done. My few questions: #1 My receivers from nodak have a little rust on them from sitting a few years, would bead...

Khyber Pass BFPU AKM Build PIC HEAVY

4/19/2013 9:36:25 PM

Just finished up my KP project. Khyber Pass type AKM built using a Polish kit. I added a Russian sling and some really cool Russian Type 2 wood I sourced off a member of another forum. The wood took a little modification to fit properly given that...

Atlantic has Romanian barrels in stock

4/18/2013 10:23:21 PM

I know tons of people are looking for them. Go get some. Limit of three.

Where can I find a 5 45 real Krinkov barrel or atleast one with the correct rifling

4/17/2013 4:39:47 PM

I heard RGuns barrels are a 1-8" twist and the correct rifling should be 1-6" twist. My searches have turned up negative for any in stock. Is this going to have to be a custom job?

AR15.Com - Build It Yourself

How hot can I get magazines

Spot weld diameter

Any ak builders in mid TN

How far back should the rear sight block be

M70AB1 Kit value check

Krebs Custom BHO Selector worth 60 bucks

Source for Chinese front an rear trunnions

Khyber Pass DMR Rifle

Building an AK47 from a shovel