Open a rem700 bolt face

3/3/2024 9:17:44 PM

Is it common to be able to open a bolt face from whatever .233 is to a .470 for .308win based cartridges?

barrel tools

1/26/2024 10:29:28 PM

what product/tools are best for honing, grinding, polishing feed ramps inside a barrel collar?the barrel feed ramps are scratching and goug...

Who to send R700 to for barrel swap

10/23/2023 12:32:01 PM

Not looking to mess with it myself.Preferably want someone that I can buy the barrel from, have them blueprint, true and swap it,...

Raceway wrench failure

10/13/2023 10:53:42 PM

These wrenches are often super handy. I also have the other type that clamps around the outside, but usually grab this one first jus...

Any issue with re using a Rem 700 take off barrel

7/31/2023 12:22:45 AM

Hello, I have 6 Remington 700s all in 308 Winchester and all set up pretty similar. I'm considering re-barreling 2 or 3 of them ...

Is Bedding A Weatherby MKV 9 Lug A Fool s Errand

7/15/2023 12:57:49 AM

There seem to be disagreeing points of view. Found a Bell & Carlson tactical stock for cheap and I was going to maybe bed&...

Anyone know who could turn and cut a barrel like this See Pics

7/2/2023 6:46:50 PM

I�m looking for someone to modify a barrel. Any information you have would be greatly appreciated.I initially thought these were simple...

Who knows a reputable shop to reprofile a barrel

5/12/2023 12:55:40 PM

ADCO Firearms and John Thomas said no. It's a new Lilja AR-10 barrel that is too effing heavy.

Wheeler Torque Wrench

5/8/2023 4:22:39 PM

Is it good enough? Is there something comparably priced that I should consider? I will mainly be using it for scope mounting.

Effect on precision by chopping down and threading muzzle on known shooter

5/8/2023 4:29:11 AM

I have a Savage 12LRP in 6.5 Creed with the full length 1" thick bull barrel (26" bbl). It's my best shooting rifle, putting&n...

Who are we using nowadays for barrel smithing

4/5/2023 12:46:31 AM

Have PS90 barrel needing cut down and threaded.

Savage prefit

3/24/2023 9:50:28 PM

Anyone able and willing to do a Savage small shank prefit from a Proof CF blank.

510 Whisper builders

3/13/2023 1:06:11 PM

Not a super common one but we've had at least one member build one I know (fatty maybe?). I've got it in my head that I&nb...

Here s one way to reuse a bull bbl

3/11/2023 4:06:45 AM

[youtube]e3yjfZA58SU[/youtube]TLDW: A reversible bull bbl w/ the gas port in the exact center of the length, & chambers & action thre...

Savage 111 300 WIN MAG Sticky Stock

2/26/2023 1:38:06 PM

Has anyone encountered this sticky stock mess on a savage synthetic stock? I hadn't shot it in a while but pulled it out for&n...

Style of Remington 700 action screws

2/12/2023 10:42:28 PM

Hello,Yes, I know the thread is 1/4-28.I would like to know what the head is. The OEM screws are.... interesting. It's like&nb...

AR 308 Mid Length Hand Guard

1/30/2023 11:57:59 PM

Trying to find the subject part that fits standard delta ring and round front retainer for Ballistic Advantage mid length 16" .308 barrel...

Please Help Me ID The Manufacturer Of This Barrel

1/20/2023 11:43:18 PM

OK Gentlemen, please help me ID this .308 WIN barrel�trying to figure out who made it.The story on it is that it�s a take-of...

Rem 700 rust issue

12/23/2022 1:07:17 AM

Well long story short had my Rem 700 SPS tactical 308 in storage and when I was checking the rifle out found that the locking&n...

Wanting to build a middle of the road rifle 2 3 Update bought a rifle instead

12/4/2022 1:53:55 AM

Update-So for a while I was thinking about building, but ended up deciding to buy one. A Bergara HMR and Sako S20 were on&nb...

Mesa Precision Summit Carbon Six Prefit Questions

11/30/2022 11:21:16 PM

A while back, I went on a quest to find an action which offered a lower than 90 degree bolt lift, a 3-position safety, and ...

Where to Start Learning

11/22/2022 7:11:38 PM

I've assembled AR-15s, 10s, 9s, and none of it was all that difficult. The online resources are endless. But what about bolt actions?&nbs...

can t get Howa 1500 barrel to come off even with extreme torque

11/3/2022 1:24:54 PM

A friend asked me to remove his Howa 1500 barrel. I have all the right tools, and have done tough military barrel removal&nbs...

Homemade fiberglass stock question

10/14/2022 1:52:59 AM

Hello,I am in the process of building a gun stock for rem700. Before anyone asks why I'm building one instead of buying one ...

Headspace gauge

9/18/2022 3:30:32 PM

Between the Clymer and the Manson headspace go & no-go gauges which do most prefer from a product quality and accuracy standpoint?Than...

Desert Tech bolt handle

9/14/2022 11:37:47 PM

What are the threads on a desert tech bolt handle and who makes an aftermarket option?

Barrel for Remington 700 in 243 converted to 350 legend

8/6/2022 3:12:38 PM

I have two rifles chambered for 243. One is a Colt Sauer, one is a Remington 700. I don't shoot either. Illinois just&n...

Can I fit a remage barrel to a Weatherby Mark V action

7/25/2022 7:18:31 PM

For those who may know the answer to this, I have a Mark V magnum action I would like to switchbarrel. I understand the t...

HS Precision stock on Remington model 7

7/13/2022 4:48:09 PM

Anybody here ever put a Remington model 7 Predator in a HS Precision stock? Or even a Bell & Carlson?I know it might need&nb...

Please help me with my Remington 700

7/11/2022 1:33:47 PM

As most of you know (or maybe you don't) my company buys PD trade in guns and equipment. About 8 months ago I received a a...

AR15.Com - Gunsmithing