Archived Posts » 59,789,155
Completed my 2nd AR build last night
2/11/2012 10:28:12 AM
C3 Industries Billet Lower
Vltor MUR 1 Upper
Daniel Defense 1:7 16-in Mid Length Hammer Forged Chrome Lined Barrel
Daniel Defense Omega-X Rail
Vltor E-Mod Mil-Spec Stock
Bravo Company BCG
BCM/Vltor Mod 4 Gunfighter Charging Handle
Troy Industries Winter Trigger Guard
Troy Industries Front & Rear Tritium BUIS
KNS Anti-Rotation Pin Kit
Smith Enterprise Vortex Flash Hider - I'll probably tweak the timing a little on this after I see how it performs
Falcon Industries ERGO Grip
Aimpoint PRO
Vltor Gas Block - I'll be ditching this and using a low profile design. I had this laying around so I used it
DPMS LPK - This will be the last time I ever use their crap again. Original trigger out of spec and would not fit & trigger pull felt like two pieces of 80 grit sandpaper being rubbed together. Lots of polishing to clean it all up
Now if the weather will at least get above freezing I'll go out and get it sighted in. Taking it to Nevada in a month for a 2 day rifle course
MODS: sorry for the over sized 1st picture. Can't get it to resize
Vltor MUR 1 Upper
Daniel Defense 1:7 16-in Mid Length Hammer Forged Chrome Lined Barrel
Daniel Defense Omega-X Rail
Vltor E-Mod Mil-Spec Stock
Bravo Company BCG
BCM/Vltor Mod 4 Gunfighter Charging Handle
Troy Industries Winter Trigger Guard
Troy Industries Front & Rear Tritium BUIS
KNS Anti-Rotation Pin Kit
Smith Enterprise Vortex Flash Hider - I'll probably tweak the timing a little on this after I see how it performs
Falcon Industries ERGO Grip
Aimpoint PRO
Vltor Gas Block - I'll be ditching this and using a low profile design. I had this laying around so I used it
DPMS LPK - This will be the last time I ever use their crap again. Original trigger out of spec and would not fit & trigger pull felt like two pieces of 80 grit sandpaper being rubbed together. Lots of polishing to clean it all up
Now if the weather will at least get above freezing I'll go out and get it sighted in. Taking it to Nevada in a month for a 2 day rifle course
MODS: sorry for the over sized 1st picture. Can't get it to resize
2/11/2012 10:40:43 AM
#3 awaits you
2/11/2012 10:45:33 AM
Nice!
2/11/2012 8:38:02 PM
Very nice. 
2/11/2012 8:53:38 PM
2/11/2012 10:15:35 PM
Looks good. Needs paint.
2/11/2012 10:59:34 PM
sexah
2/11/2012 11:04:56 PM
Looking good. Can't wait to get some funds to start on a build.
2/20/2012 12:45:55 PM
Looks good. Is your front BUIS on backwards, or am I retarded?
2/20/2012 4:19:36 PM
Your rear buis can go back one more slot on the receiver. Looks like a good set up now get out and shoot the shit out of it
2/20/2012 6:35:57 PM
Originally Posted By OIF_Vet08-09:
Looks good. Is your front BUIS on backwards, or am I retarded?
Looks good. Is your front BUIS on backwards, or am I retarded?
Thanks. I've always installed in this position as it provides a longer sight radius between the front and rear sights
2/20/2012 6:40:02 PM
Originally Posted By Dirty_25:
Your rear buis can go back one more slot on the receiver. Looks like a good set up now get out and shoot the shit out of it
Your rear buis can go back one more slot on the receiver. Looks like a good set up now get out and shoot the shit out of it
And that I did this past weekend. The trigger needs a little more work as it's still a bit rough. This is my first Aimpoint and I sure like it. Much easier on my laser corrected eyesight than the Eotech I had.
