Shop Tool Rental Denton TX New .5 Bender Etch-O-Matic
Well Guys it is Official I am now a FFL-07 Manufacture
We have now Added a Etch - O - Matic to the shop, if you want to bend that flat and add your own serial number then you are now able to.
Crowley Armory is now in business
New for the shop
AK Builder NEW FLAT BENDER 1.0 & 1.5 FLATS
Grand Opening Special 5.00 Transfers for the 1st 30 days of business.....
I have a small shop in Denton TX that I will rent to you and my time to help you complete your parts kit. YES FLATS CAN BE BENT NOW TOO. Blast Service available as well. This is a RENTAL service you WILL build the kit I WILL assist and guide you. 469-236-9507. If there is something you want to do please call me. I have references on request. I DO NOT SELL RECEIVERS or GUNS.
Flat Build…………175.00-225.00 (Yes these do take a bit more time and energy)
Barrel Assembles…..125.00 Shipped back to you (Pressed Pinned Head Spaced)
12 ton Press
Flat Bender by AKBUILDER
Spot Welder w/Rail Tong by AKBUILDER
Small Rivet Tool by Gunthings.com
Long Rivet Tool by Gunthings.com
Barrel Press Tools by Gunthings.com
5.45x39 & 7.62x39 Head Space Gage
Small Gas Torch (No Mig/Tig)
Barrel Threading Equipment
Vise, Dremil, Sander, Grinder (Bench & Hand), All the tools to build an AK or Two.
***********BLENDER NOT 4 SALE*********************
AK BUILDERS New bender does a great job, he has it so it actually has negative camber in the bend on the bottom, when the punch is completed in the die. My first one looked funny to me it was not 90 degree when the process was complete. Now when you remove the die and shoe then remove the 4 bolts and pull the receiver from the punch the deflection causes the sides to come to a complete 90 degree to the bottom. Just do not try to bend the sides well still in the punch. It is truly a awesome bender.
PMed you :)