Archived Posts » 60,546,157
SnapOn Tap & Die Set, Metric 3mm - 12mm, Adjustable Dies - $150 Shipped - Traded Pending Arrival
4/16/2011 7:58:36 PM
I have for sale the following tap and die set. It's never been used, and is brand new, as is. Contains 41 pieces. A really nice set all in all.
Description:
Taps and dies from 3 to 12mm, a BSP tap and die, two die stocks, three tap wrenches, a metric thread pitch gauge, and a die adjusting screwdriver (41 pcs). Set includes T305M thru T1217M Metric Taps; D305M thru D1217M Metric Dies; T110M BSP Tap; D020M BSP Die; TD3A and TD10A Die Stocks; TD4A, TD50 and TD88A Tap Wrenches; TDM100 Metric Thread Pitch Gauge; and TDS1 Die Adjusting Screwdriver (41 pcs.) in storage case.
Additional Description:
An important feature of the dies in these sets (except GAM541 and GAM540) is a small adjusting screw which changes the nominal size .003" under or over to give a tight or loose fit to your thread. Die size 1/4" to 1/2" and 7 mm to 12 mm are a one-piece, 12-point design that can be turned with a 1" socket wrench (5/8" socket wrench for 3 to 6 mm dies) when working in places where a normal die stock cannot be used. The three largest die stocks (TD10A, TD35, and TD40) are self-centering and adjust to the diameter of the bolt. U.S. Fed. Spec. GGG-T-60 applies to taps; GGG-D-296B applies to dies.
Payment: PayPal is fine but add 4%. Postal Money Order is also fine, will be shipped for free via USPS Priority Mail with Delivery Confirmation.
IM me for fastest response!
Description:
Taps and dies from 3 to 12mm, a BSP tap and die, two die stocks, three tap wrenches, a metric thread pitch gauge, and a die adjusting screwdriver (41 pcs). Set includes T305M thru T1217M Metric Taps; D305M thru D1217M Metric Dies; T110M BSP Tap; D020M BSP Die; TD3A and TD10A Die Stocks; TD4A, TD50 and TD88A Tap Wrenches; TDM100 Metric Thread Pitch Gauge; and TDS1 Die Adjusting Screwdriver (41 pcs.) in storage case.
Additional Description:
An important feature of the dies in these sets (except GAM541 and GAM540) is a small adjusting screw which changes the nominal size .003" under or over to give a tight or loose fit to your thread. Die size 1/4" to 1/2" and 7 mm to 12 mm are a one-piece, 12-point design that can be turned with a 1" socket wrench (5/8" socket wrench for 3 to 6 mm dies) when working in places where a normal die stock cannot be used. The three largest die stocks (TD10A, TD35, and TD40) are self-centering and adjust to the diameter of the bolt. U.S. Fed. Spec. GGG-T-60 applies to taps; GGG-D-296B applies to dies.
Payment: PayPal is fine but add 4%. Postal Money Order is also fine, will be shipped for free via USPS Priority Mail with Delivery Confirmation.
IM me for fastest response!
