Which DD lite rail for 10.5" LMT ans YHM Phantom Ti 7.62

Which DD lite rail for 10.5" LMT ans YHM Phantom Ti 7.62

travclem [Member]

5/13/2012 1:39:33 PM

I have an LMT 10.5" SBR and a YHM 7.62 Phantom Ti on order and am planning on putting a DD lite rail on it. I know for a fact that the 9" will work, my question is, Will a 10" DD Lite rail work with this setup. The YHM doesn't reflex over the locking ring like an AAC so I'm thinking the 10" will work. Anyone have this setup?

Any ideas?

Thanks,
Travis

levi333 [Member]

5/17/2012 6:06:48 PM

Are you talking about the QD 762 version?
My setup is not quite the same, but I do have an LMT 10.5 with Larue 10" rail and a 7.62 QD Phantom can. The FH does not touch the rail, but you don't have access to the flats to tighten it down.

Hope that helps!

SYSTEM

5/17/2012 10:21:48 PM

Topic Moved

travclem [Member]

5/20/2012 7:06:35 PM

Originally Posted By levi333:
Are you talking about the QD 762 version?
My setup is not quite the same, but I do have an LMT 10.5 with Larue 10" rail and a 7.62 QD Phantom can. The FH does not touch the rail, but you don't have access to the flats to tighten it down.

Hope that helps!

Yes the QD. Thanks for the help, I'll install the FH before the rail.

LMTRocks [Team Member]

5/22/2012 5:06:41 PM

The 10" model will probably work, however the 9.5" MK18 RIS will leave enough room for the wrench to tighten the QD.

I think the 10.3" MK 18 barrels also have room to reach the flats with the rail installed.

You'll have a nice setup once its done.

Posted Via AR15.Com Mobile