Archived Posts » 59,859,448
Odd stripper clips and loader. ** More questions** Shelby Corp loader?
2/13/2012 6:51:16 PM
First time in tens of thousands of stripper clips from this lot that I found some for a different gun. The top ones Id guess are for the AK but the bottom is strait with only one way off and on. M14?
2/13/2012 12:47:23 AM
top 2 are sks bottom one is ak74 i belive
edit to add a link to more
https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=1484
edit to add a link to more
https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=1484
2/13/2012 12:49:48 AM
Originally Posted By tattoo:
top 2 are sks bottom one is ak74 i belive
edit to add a link to more
https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=1484
top 2 are sks bottom one is ak74 i belive
edit to add a link to more
https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=1484
Yeah, the AK-74 uses 15-round stripper clips. Normal mags are 30 rounds and the RPK mags are 45 rounds.
2/13/2012 1:17:52 AM
Originally Posted By tattoo:
top 2 are sks bottom one is ak74 i belive
edit to add a link to more
https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=1484
top 2 are sks bottom one is ak74 i belive
edit to add a link to more
https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=1484
You got it! Does the SKS need a loader they dont have one listed. I own a SKS but dont use it much. There are about 7 clips so far for it.
2/13/2012 1:21:23 AM
Originally Posted By WShifflett:
You got it! Does the SKS need a loader they dont have one listed. I own a SKS but dont use it much. There are about 7 clips so far for it.
Originally Posted By tattoo:
top 2 are sks bottom one is ak74 i belive
edit to add a link to more
https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=1484
top 2 are sks bottom one is ak74 i belive
edit to add a link to more
https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=1484
You got it! Does the SKS need a loader they dont have one listed. I own a SKS but dont use it much. There are about 7 clips so far for it.
The SKS (and the VZ-58 too) have the holder machined into the bolt carrier. that extremely fat t-shaped notch at the top-front of the bolt carrier is where the stripper clip goes. Last round fires, bolt locks back, you stuff a new stripper clip in, and then give the bolt handle a tug to send it back into battery.
2/13/2012 1:21:27 AM
Originally Posted By WShifflett:
You got it! Does the SKS need a loader they dont have one listed. I own a SKS but dont use it much. There are about 7 clips so far for it.
Originally Posted By tattoo:
top 2 are sks bottom one is ak74 i belive
edit to add a link to more
https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=1484
top 2 are sks bottom one is ak74 i belive
edit to add a link to more
https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=1484
You got it! Does the SKS need a loader they dont have one listed. I own a SKS but dont use it much. There are about 7 clips so far for it.
no theres a notch cut in the bolt the clips slip in and push down on the rounds clip comes out then you can send the bolt home
2/13/2012 1:34:19 AM
Originally Posted By tattoo:
no theres a notch cut in the bolt the clips slip in and push down on the rounds clip comes out then you can send the bolt home
http://dieschem.tripod.com/sitebuildercontent/sitebuilderpictures/sks7001.jpg
Originally Posted By WShifflett:
You got it! Does the SKS need a loader they dont have one listed. I own a SKS but dont use it much. There are about 7 clips so far for it.
Originally Posted By tattoo:
top 2 are sks bottom one is ak74 i belive
edit to add a link to more
https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=1484
top 2 are sks bottom one is ak74 i belive
edit to add a link to more
https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=1484
You got it! Does the SKS need a loader they dont have one listed. I own a SKS but dont use it much. There are about 7 clips so far for it.
no theres a notch cut in the bolt the clips slip in and push down on the rounds clip comes out then you can send the bolt home
http://dieschem.tripod.com/sitebuildercontent/sitebuilderpictures/sks7001.jpg
Nice. Thanks for the help!
2/13/2012 2:10:01 AM
Opened a second crate and right on top is a slightly different AR clip with a Shelby Corp spoon attached to it. Also a bunch of 2" clipd that look link they joined something together.
2/13/2012 2:27:28 AM
New spoon cant be for the AR as it has no groove for the mag spine:
2/13/2012 2:31:50 AM
looks like a k98 clip
2/13/2012 2:47:32 AM
Originally Posted By tattoo:
looks like a k98 clip
looks like a k98 clip
Right again. Little things are over $1 each too. Nothing coming up on the Shelby spoon though.
2/13/2012 4:01:46 AM
my bad didnt read it... looks like a 30 carbine spoon
heres a pic i found after some searching
http://www.ammunitiontogo.com/product_info.php/cPath/217/products_id/1331?osCsid=i5pt4caln4p1hdp5g14ce9ck04
edit to add most of what i found on shelby they made p38's i dont know who made the spoons in the pic but they look alike to me
edit for another pic
heres a pic i found after some searching
http://www.ammunitiontogo.com/product_info.php/cPath/217/products_id/1331?osCsid=i5pt4caln4p1hdp5g14ce9ck04
edit to add most of what i found on shelby they made p38's i dont know who made the spoons in the pic but they look alike to me
edit for another pic
2/13/2012 2:09:51 PM
You win again. Cant figure out how to get the loader off the spoon though.
2/13/2012 3:49:42 PM
pull hard?
glad i could awnser your questions
glad i could awnser your questions
2/13/2012 4:42:47 PM
Originally Posted By WShifflett:
You win again. Cant figure out how to get the loader off the spoon though.
You win again. Cant figure out how to get the loader off the spoon though.
It doesn't come off.
They're assembled as a unit.
The separate stripper/spoon came later.
