Archived Posts » 59,789,155
My new k31
1/16/2012 10:52:42 PM
Got this last week from wiedeners, wish i had got another as they are now sold out. It came with a sling, boyonet, and cleaning kit. This is my first Swiss rifle and im planning on getting another. Rifle is flawless except for the stock and all the numbers match. Shot it today and was blown away by its accuracy, makes my other surplus guns look like shotgun groups. Didnt have a tag under the butt plate but all in all i feel like i got a great deal. Whats the story on these clamp on scope mounts i keep reading about? GTG?
Ten shot group at 100 yards from a led slead. I think i can shrink this group alot, it was a little cold and windy out today. Ammo was swiss gp11..
Ten shot group at 100 yards from a led slead. I think i can shrink this group alot, it was a little cold and windy out today. Ammo was swiss gp11..1/16/2012 11:19:11 PM
Scope mounts are GTG, get the aluminum.
1/17/2012 7:45:21 AM
Swiss Products clamp on mount. It is solid. When you install it you well think it's going to move around, but I've had mine for a few years now and zero problems.
1/17/2012 9:31:53 AM
Swiss products makes a great aluminum mount like others have said.
Take a look at Warne rings if you do go w/ scoped setup, they are solid and the finish is very nice. I bought the low mount rings and there is just enough space between the rear sight and scope body so there is no contact. Last sight in session I had my K31 scoped setup pulling 1in @ 100yards on a 6 shot group.
Take a look at Warne rings if you do go w/ scoped setup, they are solid and the finish is very nice. I bought the low mount rings and there is just enough space between the rear sight and scope body so there is no contact. Last sight in session I had my K31 scoped setup pulling 1in @ 100yards on a 6 shot group.
1/17/2012 1:21:00 PM
Thanks everybody, also whats the best way to accurize this thing without involving bubba? Not that its bad just wondering if it can do better. i do reload so i will crank out some quality ammo.
1/17/2012 1:25:49 PM
Originally Posted By tygleran27:
Thanks everybody, also whats the best way to accurize this thing without involving bubba? Not that its bad just wondering if it can do better. i do reload so i will
crank out some quality ammo.
Thanks everybody, also whats the best way to accurize this thing without involving bubba? Not that its bad just wondering if it can do better. i do reload so i will
crank out some quality ammo.Swissrifles.com
There are plenty of tips for improving the accuracy without bubbafying you new rifle.
Congrats Btw.
1/18/2012 8:18:15 AM
Originally Posted By haLfLiFe:
Swiss products makes a great aluminum mount like others have said.
Take a look at Warne rings if you do go w/ scoped setup, they are solid and the finish is very nice. I bought the low mount rings and there is just enough space between the rear sight and scope body so there is no contact. Last sight in session I had my K31 scoped setup pulling 1in @ 100yards on a 6 shot group.
Swiss products makes a great aluminum mount like others have said.
Take a look at Warne rings if you do go w/ scoped setup, they are solid and the finish is very nice. I bought the low mount rings and there is just enough space between the rear sight and scope body so there is no contact. Last sight in session I had my K31 scoped setup pulling 1in @ 100yards on a 6 shot group.
Good point. The SP mount uses rimfire style rings, the 3/8 clamp on rail. When I looked Warne made the best ones I could find.
best way to accurize this thing
Here
The steel plate the receiver rests on in the stock can be different thickness. This thickness controls barrel preload.
1/18/2012 9:16:42 PM
Originally Posted By tygleran27:
Got this last week from wiedeners, wish i had got another as they are now sold out. It came with a sling, boyonet, and cleaning kit. This is my first Swiss rifle and im planning on getting another. Rifle is flawless except for the stock and all the numbers match. Shot it today and was blown away by its accuracy, makes my other surplus guns look like shotgun groups. Didnt have a tag under the butt plate but all in all i feel like i got a great deal. Whats the story on these clamp on scope mounts i keep reading about? GTG?[url=http://i887.photobucket.com/albums/ac75/tygleran/utf-8BSU1BRzAwNjMuanBn.jpg]http://i887.photobucket.com/albums/ac75/tygleran/utf-8BSU1BRzAwNjMuanBn.jpg[/url] http://i887.photobucket.com/albums/ac75/tygleran/utf-8BSU1BRzAwNzAuanBn.jpg Ten shot group at 100 yards from a led slead. I think i can shrink this group alot, it was a little cold and windy out today. Ammo was swiss gp11..
Got this last week from wiedeners, wish i had got another as they are now sold out. It came with a sling, boyonet, and cleaning kit. This is my first Swiss rifle and im planning on getting another. Rifle is flawless except for the stock and all the numbers match. Shot it today and was blown away by its accuracy, makes my other surplus guns look like shotgun groups. Didnt have a tag under the butt plate but all in all i feel like i got a great deal. Whats the story on these clamp on scope mounts i keep reading about? GTG?[url=http://i887.photobucket.com/albums/ac75/tygleran/utf-8BSU1BRzAwNjMuanBn.jpg]http://i887.photobucket.com/albums/ac75/tygleran/utf-8BSU1BRzAwNjMuanBn.jpg[/url] http://i887.photobucket.com/albums/ac75/tygleran/utf-8BSU1BRzAwNzAuanBn.jpg Ten shot group at 100 yards from a led slead. I think i can shrink this group alot, it was a little cold and windy out today. Ammo was swiss gp11..
Definitely GTG.
100 yds w/ GP11. 4-in-1 hole shows the rifles capability. The two flyers show my capability. Still only about a 1 1/2 inch group.
1/22/2012 8:28:43 PM
Originally Posted By madcratebuilder:
Swiss Products clamp on mount. It is solid. When you install it you well think it's going to move around, but I've had mine for a few years now and zero problems.
http://i32.photobucket.com/albums/d37/madcratebuilder/Swiss%20K-31/scoped02.jpg
Swiss Products clamp on mount. It is solid. When you install it you well think it's going to move around, but I've had mine for a few years now and zero problems.
http://i32.photobucket.com/albums/d37/madcratebuilder/Swiss%20K-31/scoped02.jpg
I ordered this same mount direclty form S&K with their rings. It was easy to install and absolutely ROCK SOLID.
Highly recommend!
I also have thier mount and rings for a Yugo 24/47. Their products are top-notch.
1/25/2012 11:08:58 PM
I wish Wideners didn't sell out of these before I got my C&R. Nobody else includes all the goodies they do.
2/12/2012 3:47:56 AM
Originally Posted By n3awalk3r:
I wish Wideners didn't sell out of these before I got my C&R. Nobody else includes all the goodies they do.
I wish Wideners didn't sell out of these before I got my C&R. Nobody else includes all the goodies they do.
I am still waiting on my C&R to arrive and hoping to find someone selling K31s.
Classic Arms is sold out as well.
