I have put about 5000 rounds threw my para p10 and now its starting to jam on the feed ramp. any idea on what to replace first. tryed diffrent brands of ammo and not changing. 5000 rounds without a single problem i might add. awsome gun.
Replace the factory mag springs with a new ones.
The factory springs go south quickly, and cause the nose of the bullet to take a dive (into the front of the mag) during recoil.
my P13 had similar problems. I replaced the mag springs with Wolff +10%, and never had another hiccup with it until the extractor broke. Replaced that with a Wilson Bulletproof, and it ran like a top for over 2.5K rounds. (like an idiot, I traded it off a few months ago....right after I gave somebody here the advice to not ever sell a gun because you always wind up regretting it. I miss that gun)
Where can I buy the wolf spring ? They are a lot of $ but well worth it. I would like to get a full size.
Wolf springs = www.gunsprings.com
Just a heads up, when installing the extra power springs, watch the angle of the top coil/follower.
If the follower is catching/forcing the slide hold open and causing the slide to lock with a round still in the mag, you will need to tweak the top coil down to lower the front edge of the follower.
got a new clip and it works great. buying new springs for the other 4 mags. thanks for the help