Archived Posts » 59,859,448
jam and stuck!!! help
6/4/2011 10:24:45 PM
my ruger sr9 is jammed bad i cant get it out help please
6/4/2011 10:53:25 PM
Originally Posted By younggunAL:
my ruger sr9 is jammed bad i cant get it out help please
my ruger sr9 is jammed bad i cant get it out help please
Can you provide more details?
6/5/2011 12:17:32 AM
it shot. i guess it was tryin to eject the empty shell out. the action i guess its callled slide back a quarter inch and got stucki cansee the shell
6/5/2011 12:56:34 AM
Did you get the mag to drop out?
6/5/2011 1:07:20 PM
Take a picture of it, and post it. That way we can get a good look at it.
6/5/2011 1:47:25 PM
yea the mag droped out fine no problem, ok i will
6/5/2011 3:39:18 PM
6/5/2011 4:33:02 PM
You could send it to Ruger.
If there is a spent case stuck in the chamber, I would try a pistol cleaning rod in the end of the barrel.
Tap the rod with a block or someting while pulling the slide back. This would put pressure on the spent case to remove itself from the chamber.
Blazer ammo? I noticed the case looks silver?
my .02 cents...
Good luck.
If there is a spent case stuck in the chamber, I would try a pistol cleaning rod in the end of the barrel.
Tap the rod with a block or someting while pulling the slide back. This would put pressure on the spent case to remove itself from the chamber.
Blazer ammo? I noticed the case looks silver?
my .02 cents...
Good luck.
6/5/2011 4:46:26 PM
its cheap ammo last min buy at walmart. i tryed that but ill try it again the way you said it i also oiled it up real good. would a gun smith be able to fix it or do i need to send it to ruger
6/7/2011 9:46:53 PM
Have someone hold the gun and pull back on the slide while you tap a rod from the muzzle end into the empty case. That should get it unstuck. Use a dowel or rod thats a semi-snug fit in a spent case and still fits in the barrel. Do not use a small dia steel cleaning rod or it could punch through the case head and you will still have a stuck case. Use a hardwood, plastic, alum or brass dowel and make it long enough that you won't smack the muzzle when/if it dislodges while your helper pulls it all the way back. If you have a shotgun cleaning rod it might fit.
If you get it out, do a thorough cleaning/inspection of the chamber and check the extractor for damage.
If you get it out, do a thorough cleaning/inspection of the chamber and check the extractor for damage.
6/9/2011 2:54:43 AM
You verified that's an EMPTY case right?
6/10/2011 10:51:49 PM
Try the above mentioned tips and it sounds like you have let oil sit in the area for awhile. You should, with some careful work, get it out
6/13/2011 2:15:46 AM
yea i tryed it a few times i sent it to ruger.
