Baby Eagle grip screw question
I bought my Jericho 941 used, and one grip screw has a lock washer under it, while the other does not. The one without the lock washer loosens while firing, so I am looking for a replacement lock washer. More specifically, since I have replaced parts with Baby Eagle parts from Magnum Research, can anyone tell me if the lock washer is a standard part in a Baby Eagle? I do not see such a part in my Jericho manual's parts diagram, nor in the list of available parts.
I will call MRI's parts department, but previous experience (with EAA service/parts!) compels me to do as much research and acquire as much knowledge as possible first :)
Thanks in advance,
Paul
I've got a Baby Eagle, and I don't think mine has lock washers installed. The screws do back out when shooting though...
Sorry to hear yours does not have one. Mine works perfectly. When I find my camera, I will look into posting a picture in case someone can identify it, or better yet a source for more.
lowes or home depot has a bunch of that stuff in the hardware dept. just make sure that u take the other washer for comparison but dont loose it! i recommend putting it into a plastic Ziploc!!!
on mine both sides have the lock washers, you can grab them fro homdepot or lowes as stated above.
