AR15.Com Archives
 Finally - The Yugo Rear Trunnion Insert for ACE side folder
PrimaryWeapons  [Industry Partner]
6/5/2007 11:07:20 PM
We are happy to announce that we finally have (in hand) the rear trunnion inserts that allow you to use the ACE side folding stock adapter (and stock ) on your Yugoslavian AK47.

**This item is only for fixed stock Yugoslavian Trunnions**

This item is CNC machined out of solid stock and is designed for a light pressure fit into the inlet of the fixed stock Yugo trunnion. The unit also includes a screw that is inserted from the inside the receiver for added support.

You will not need a press or similar to install it, but it is designed to be tight enough to use a rubber mallet to press it into the trunnion. The accompanying screw is installed to keep the insert from vibrating out.

Here is a picture of the insert in the rear trunnion attached to the ACE side folding mechanism.



You can buy these directly from our website for $39.95 by clicking here - LINK




As always, let me know if you have any questions.

Todd

Tactical_T  [Member]
6/6/2007 12:07:05 PM
Do you have a picture of one with the stock attached?
PrimaryWeapons  [Industry Partner]
6/6/2007 12:19:04 PM
Is this what you mean?



The ACE Stock is remarkably comfortable on the AK. MUCH better than the underfolder in my opinion.

Todd

Tactical_T  [Member]
6/6/2007 2:59:38 PM
Wow.....that looks better than I thought it would, on what appears to be a Yugo M70. I'm not sure I like it for my Yugo M92 kit, as I like a Krink to be original and as short as possible, but you're tempting me to pick up an M70 kit and do that stock set up. Damn, now I have to start looking for an M70 kit. I hate you man...!!!

If you have another pic with the stock folded, please do post the pic.
PrimaryWeapons  [Industry Partner]
6/7/2007 12:11:41 AM
If you hate me now - I'm not sure this is going to make it any better.














Hope this "helps".

Todd


Tactical_T  [Member]
6/8/2007 7:39:26 PM
Hey man, I intend to pick up an AKS-74 parts kit next week, and am now (because of your folding stock pics) am also considering an M70 parts kit, as I found one from the same distributor for a sweet price.

Any chance you could tell me the measurement from the back of the receiver to the back of the unfolded stock, including the rubber recoil pad? Going along the top of course.

Other than the length, I guess my only other concern is a rear sling attachment point. I guess I could always drill and tap a sling stud on the left rear of the receiver like on the AMD-65's.
themadhatter  [Team Member]
6/8/2007 7:51:15 PM
PrimaryWeapons  [Industry Partner]
6/8/2007 8:53:56 PM
I don't actually have that rifle here any more - it was for a customer - so I'm afraid I'm not going to be very helpful on the measurement.

As far as the sling, you can buy the ACE side folding unit with a sling attachment point. Black Jack Buffers sells them on their site.

Hope this helps.

Todd

Va_Punisher  [Team Member]
6/24/2007 1:08:15 AM
That AK looks sweet, set you an IM with some questions