Another missing part I just Discovered Yugo Underfolder part
I need some kind of straight pin that goes into the nut on the underfolder joint...It keeps it from getting loose....not sure where to go...maybe some more help from superjared?
I need this straight pin the #4 on this diagram....
http://home.earthlink.net/~mwsjb/AKbuild3.htm
I don't know anyplace right off hand that sells those.
If you can't find one you could just go to the hardware store and get a roll pin and cut it to length. It doesn't show and all it does is hold that nut from turning so It's probably not that critical.
It would get you by until you can find the proper part if you want it to be authentic.
I just measured the pin on one of my M64's and it is about .117 if that helps any. They are the only underfolders I have but I suspect they are all the same.
thanks...you did it again...you need an ar15.com link called superjared says....Im not trying to make authentic at all....selling te woo grips and putting MI kit on it and some sort of reflex sight! Thank Again!
Coincidently I was just looking for some other stuff and found the pins if you want the right one.
http://www.ak-builder.com/index.php?dispatch=products.view&product_id=30028
your the man! thanks again
I just picked up some pins at home depot I got a few sizes so ill post when im complete and tell you how it went...
the pins i bought was an epic fail....but I found a dremil tool accessory that made a perfect pin....I cut it to length and it fit perfect. Problem Solved!
