Is there a fix for AB2 stock wobble?
Bret Hankes of Never Enough Guns built my M70AB2 up from a 1989 dated kit. It's a great shooter, but it's got a ton of stock wobble. Probably a half inch to an inch up and down, and some side to side when folded under. Is there a fix for this? Does something need tightening? Any help is appreciated!
you can knock out the roll pin and try to tighten the round nut.there are a couple of fixes.numbert 1,weld up the stock pin leg holes.alot of work.weld up legs,alot of work.try to peen stock legs to make them tighter in the hole= less wobble.hard to get away from underfolder stock wobble.remember these were war weapons and got alot of use.
I fixed mine with minimal effort. I took the stock apart and had silver solder added to the four ears that fit into the round slots. By taking my time and filing slowly, I hand fit the ears to the holes. I now have a very tight fit and a great shooter. Good luck!
