Archived Posts » 59,609,787
Before and After...
7/17/2007 6:11:22 PM
Finally done with my 2 Maadi ARMs.
Top pic is obviously the before pic, however in the after pic, the top rifle from pic 1 is on the bottom. Just look at the muzzle breaks.
Both rifles have Red Star Arms US made gas pistons, Tapco FCG's and breaks and K-Var US made polymer furniture.
Top pic is obviously the before pic, however in the after pic, the top rifle from pic 1 is on the bottom. Just look at the muzzle breaks.
Both rifles have Red Star Arms US made gas pistons, Tapco FCG's and breaks and K-Var US made polymer furniture.
7/19/2007 7:58:09 AM
What did you use to paint the one mag? KG Gunkote and airbrush?
7/19/2007 9:49:24 AM
Bravo!
7/20/2007 7:28:50 PM
Mak,
I took the mag apart, cleaned the body and floorplate with a degreaser and then some good old fashioned soap and water.
After drying, I applied 3 coats of Krylon "Satin Touch" spay paint that I bought at my local Wal-Mart. Letting each coat completely dry before appling the next.
I was impressed myself on how good the mag came out looking in person after it was finished. I was very happy with the result.
I took the mag apart, cleaned the body and floorplate with a degreaser and then some good old fashioned soap and water.
After drying, I applied 3 coats of Krylon "Satin Touch" spay paint that I bought at my local Wal-Mart. Letting each coat completely dry before appling the next.
I was impressed myself on how good the mag came out looking in person after it was finished. I was very happy with the result.
