adding side folder to saiga 223
So my parts should be in tomorrow if the ups man can find the house this week. I ordered this http://store.carolinashooterssupply.com/servlet/-strse-892/Saiga-Rifle-Conversion-Kit/Detail . along with a push button folding mechanism. I believe that the upper tang must be removed from the receiver and i cant find any pics or videos. Can anyone point me to some? if not just cut the tang off with a dremel cut off wheel and grind it flush or what? I wont hack on it until the parts arrive to make sure it must be done with this set up.
Edit: found the CSS chanel. thanks guys. Arfcom comes through again!
That was how i did mine. If I remember correctly they will send instructions with the parts but if not, just look on youtube for carolina shooter supply. They have step by step instructions from removing the old trigger guard to putting the new hammer and stuff in. It is a lifesaver if you get stuck.
Yes, for the ones where you have to cut off the tang, a dremel will get it done. What you have to do will be obvious when you get the parts.