Archived Posts » 59,726,163
Could this be a problem?
4/30/2011 5:41:57 PM
Took the handguards off and installed a quad rail. While trying to remove the upper handguard I went a little to hard and ended up bending the metal a bit at the edge of the gas tube opening. I dont think itll be a problem but what do you all think? Should I buy another?
4/30/2011 8:35:50 PM
Its not a real big problem but Id replace it anyways...
4/30/2011 9:41:20 PM
I figured. I thought about taking a dremel to it ever so slightly but decided to leave it as is.
5/1/2011 10:05:13 AM
If the bolt still cycles smoothly, leave it. I've had worse looking shit with some of mine.
5/1/2011 11:01:45 AM
Not a problem as long as your piston passes it freely.
If it does, dremel it smooth and use it.
If it does, dremel it smooth and use it.
5/1/2011 2:48:35 PM
Exactly what I was going to do. Im thinking a polishing wheel should do it.
5/8/2011 6:42:12 AM
File or grind it smooth and you're fine.
