Hey guys, I have a bugly 74 on a Nodak Spud (NDS-2SF)
It will chamber a round, and fire, cycle the next round, but the trigger will not reset completely. Its a Tapco G2. Any Ideas?
I will try to get some pictures up.
Ok this is what I see when I take the dust cover off after it fires...
Shouldn't it look like this?
The right side of the trigger spring isn't hooked over the trigger leg. It might be hanging the trigger reset up a bit.
Hi, both legs of the trigger have to be under the spring in order for it to re set. Only one won't do it. Just put the trigger spring over both trigger legs and it will re set perfectly. racats
+1 trigger spring. Use punch like tool in stock to reposition spring on trigger.