Archived Posts » 60,595,333
47 vs 74 Magazine differences?
8/7/2011 8:26:18 AM
Suppose you had ~100 mags between the two guns and never did a good job sorting them out 
I did a quick comparison between a couple and I really didnt see a difference... same mag follower, same curvature, same length, etc... anything that I am missing that obviously seperates the two?
I did a quick comparison between a couple and I really didnt see a difference... same mag follower, same curvature, same length, etc... anything that I am missing that obviously seperates the two?
8/7/2011 9:46:14 AM
The curve of a '47 will be sharper than the straighter '74 mag.
8/7/2011 10:25:17 AM
Originally Posted By echo_5:
The curve of a '47 will be sharper than the straighter '74 mag.
The curve of a '47 will be sharper than the straighter '74 mag.
+1
Much straighter on the '74, should be able to tell the difference from 10' away.
8/9/2011 12:52:32 AM
yup thats a dead giveaway.
8/9/2011 6:19:01 AM
And if you can't see difference in the curve you should see the slots cut into the top of
the AK74 mags for the stripper clip spoon to slide into.
the AK74 mags for the stripper clip spoon to slide into.
8/9/2011 1:05:25 PM
Originally Posted By Jtrout141:
And if you can't see difference in the curve you should see the slots cut into the top of
the AK74 mags for the stripper clip spoon to slide into.
And if you can't see difference in the curve you should see the slots cut into the top of
the AK74 mags for the stripper clip spoon to slide into.
Thanks for the responses gentlemen, between the stripper clip and lookin more closely at the curvature difference I'll do my best
Can I assume that a 47 mag will / will not fit into a -74 receiver as far as hands on verification?
8/9/2011 4:43:01 PM
74 mag will not fit in a 47. Tried it the other night out of curiosity.
ETA: spieling errerrz and awl dat jaz
ETA: spieling errerrz and awl dat jaz
8/9/2011 11:57:29 PM
Originally Posted By Brettb19:
same mag follower, same curvature, same length, etc...
same mag follower, same curvature, same length, etc...
Follower, curviture and length are all different. If you can;t see the difference I would suggest looking at some images on Google to see the differences.
8/11/2011 2:53:57 AM
I try to only buy poly mags for the 74 and steel mags for the 47. Have a couple of steel Tantal mags that look too similar to the 47 mags.
