Archived Posts » 59,821,464
Palmetto State Armory - 16" 5.56 Chrome-Lined, mid-length, Complete Upper - $429.99!!
9/15/2011 7:36:05 PM
We are proud to announce the long awaited arrival of our 4150 chrome-lined mid-length uppers. Starting at just $429.99 for the complete upper, or get one without bolt carrier group and charging handle for only $349.99!!
We start with a 4150 CMV Barrel, chrome-lined, lead-lapped, and chambered in 5.56 NATO with a 1/7 twist. Medium profile barrel is phosphate coated, and finished off with an F-marked front sight post with sling swivel, Mid length-hand guards with heat shields, and A2 flash hider.
The forged 7075-T6 aluminum A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer, and are marked with the Palmetto State Armory logo on the left side, up front, just below the rail.
Bolt: Bolt is made of Mil-spec Carpenter 158 steel, Shot peened, MPI and HPT. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is parkerized outside, chrome-lined inside, and laser engraved with the Palmetto State Armory logo.
Each upper is assembled to order with care with all US-made parts. Please allow allow 7 business days for your upper to ship. If ordering MOE, specify color in special instructions at checkout.
Shipping $15
To order, click HERE
We start with a 4150 CMV Barrel, chrome-lined, lead-lapped, and chambered in 5.56 NATO with a 1/7 twist. Medium profile barrel is phosphate coated, and finished off with an F-marked front sight post with sling swivel, Mid length-hand guards with heat shields, and A2 flash hider.
The forged 7075-T6 aluminum A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer, and are marked with the Palmetto State Armory logo on the left side, up front, just below the rail.
Bolt: Bolt is made of Mil-spec Carpenter 158 steel, Shot peened, MPI and HPT. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is parkerized outside, chrome-lined inside, and laser engraved with the Palmetto State Armory logo.
Each upper is assembled to order with care with all US-made parts. Please allow allow 7 business days for your upper to ship. If ordering MOE, specify color in special instructions at checkout.
Shipping $15
To order, click HERE
9/15/2011 7:48:09 PM
Awesome,
Is medium profile a government profile, or something in between?
Is medium profile a government profile, or something in between?
9/15/2011 9:04:46 PM
Just a little bit meatier, and more squared off, than a government profile.
9/15/2011 10:33:35 PM
GREAT deal. you guys always impress me. 
9/16/2011 11:33:07 AM
9/16/2011 3:53:14 PM
exactly what i been waiting for from you guys, will be my first build, and pretty much all PSA goods.
9/16/2011 11:15:47 PM
What is the barrel diameter in case one wishes to replace front sight with a low profile has block?
9/17/2011 11:55:39 AM
Are these barrels double chrome lined and cold hammer forged like the last ones were?
9/17/2011 1:48:01 PM
The hammer forged, "double" chrome lined uppers will be available again in a few days.
Originally Posted By Blain:
Are these barrels double chrome lined and cold hammer forged like the last ones were?
Are these barrels double chrome lined and cold hammer forged like the last ones were?
9/17/2011 1:48:27 PM
Checking on this
Originally Posted By dragun1:
What is the barrel diameter in case one wishes to replace front sight with a low profile has block?
What is the barrel diameter in case one wishes to replace front sight with a low profile has block?
9/17/2011 8:00:35 PM
Thanks for checking on diameter purchased one already but wish to put a free float tube on it
9/18/2011 10:31:50 PM
can these be ordered to be NYS AWB compliant? No Bayo Lug and a pin and welded comp instead of a FH?
9/19/2011 11:05:27 AM
The barrels are .75in diameter.
We do not offer any front sight posts without the bayonet lug, but we can permanently attach a brake for you.
Originally Posted By truckie:
can these be ordered to be NYS AWB compliant? No Bayo Lug and a pin and welded comp instead of a FH?
can these be ordered to be NYS AWB compliant? No Bayo Lug and a pin and welded comp instead of a FH?
We do not offer any front sight posts without the bayonet lug, but we can permanently attach a brake for you.
11/4/2011 8:35:58 PM
Hey PSA! Tried to order one of these bad boys today to keep my PSA lower company but shows "Order not processed." Out of stock? No mas? If so, ETA on another round of 16" mids? Thanks!
11/6/2011 12:16:02 AM
I asked them a little while ago, it should be about 2 weeks. I hope it comes earlier then that
11/13/2011 4:13:56 PM
This is next on my list, Christmas present for the wife.
11/13/2011 6:47:01 PM
Originally Posted By PalmettoStateArmory:
The barrels are .75in diameter.
We do not offer any front sight posts without the bayonet lug, but we can permanently attach a brake for you.
The barrels are .75in diameter.
Originally Posted By truckie:
can these be ordered to be NYS AWB compliant? No Bayo Lug and a pin and welded comp instead of a FH?
can these be ordered to be NYS AWB compliant? No Bayo Lug and a pin and welded comp instead of a FH?
We do not offer any front sight posts without the bayonet lug, but we can permanently attach a brake for you.
Nice that you offer the pinned brake option, didn't know about that. I've been asked that about your uppers. Cutting off the bayonet lug is easy enough for most builders.
11/15/2011 9:20:33 PM
60 day rule
