Archived Posts » 59,757,950
WEAPON CONTROL MOUNT-N-SLOT for TRX/VTAC/JPI/MI/YHM/PRI and MOE, A2 Round Hand Guards by IWC!
11/25/2010 3:39:46 PM
Hi Everybody,
Impact Weapons Components, LLC is proud to announce our new WEAPON CONTROL (hand stop) MOUNT-N-SLOT brand Direct Attach Mounts
APPLICATION:
Magpul Industries Corp M.O.E. CARBINE-Length Hand Guards and ANY A2/M4 Style ROUND Hand Guards and Troy, Ind. TRX/VTAC Extreme Battlerails, JPI,Inc/Viking Tactics, Inc. VTAC Fore Ends, Midwest Industries, Inc SS Series, PRI, Inc GEN III, YHM, Inc Smooth & Convertible and ANY ROUND Hand Guard / Fore End with a HOLE or SLOT
READ THE WEAPON CONTROL MOUNT-N-SLOT REVIEWS!!!
Review: YELLOWV
Review: NickDrak
Review: "Jerking the Trigger" by Matthew Danger
ELIMINATE RAILS: IWC's Direct Attach MOUNT-N-SLOT design eliminates the need for bolt-on rail sections, saving weight, bulk, space while reducing part count and improving function and reliability.
BUY NOW
PRICE: $39.95 EACH + $3.95 S+H
PATENT PENDING
WEAPON CONTROL MOUNT-N-SLOT - Made by Impact Weapons Components in Colorado:
•WEAPON CONTROL MOUNT-N-SLOT™ is designed to provide a low profile, ergonomic and highly functional device for enhancing weapon control.
•IWC designed the WEAPON CONTROL MOUNT-N-SLOT™ to attach directly anywhere on the surface of the hand guard / fore end through any hole / slot, eliminating the need for a 1913 MIL-SPEC Rail Sections.
•Direct Attach Design saves weight, reduces part count, increases weapon reliability and increases the function of the WEAPON CONTROL MOUNT-N-SLOT™ by placing it directly against the surface of the hand guard / fore end.
•The operator can place them in the desired location, usually along the bottom of the hand guard, allowing the weapon to be pulled into the shoulder pocket, or directly attached to the side of the hand guard, allowing the WEAPON CONTROL MOUNT-N-SLOT™ to index perfectly in the web of your hand, like a GLOCK™ or 1911 would, for proper alignment behind a weapon mounted flashlight.
•SPEND LESS MONEY: Compare to $60.00 or more for a Hand Stop Mount + a Rail Section + Shipping Charges.
•DIRECT attach design eliminates the need for 2 separate mounts; 1- A Hand Stop Mount and 2 - A Picatinny MIL-Spec 1913 Bolt-on Rail Section.
•Ergonomic, DIRECT attach design eliminates all sharp edges which can ensnarl the operator’s gear.
•55% increase in usable hand guard grip area by eliminating the Picatinny MIL-Spec 1913 Bolt-on Rail Section.
•35% lower profile than a separate Mount and Picatinny MIL-Spec 1913 Bolt-on Rail Section.
•Ultra-lightweight MOUNT-N-SLOT™ design weighs only .79 ounces. Over 65% less than a separate Hand Stop Mount and Picatinny MIL-Spec 1913 Bolt-on Rail Section.
•3 parts are eliminated from your firearm.
•Micro-Adjustable mounting allows the operator to mount anywhere through any SLOT or HOLE on the firearm hand guard.
•CNC Machined from 6061-T6 aluminum; Hard anodized Type III matte finish per MIL-A-8625F.
•Easily installation and simple to follow instructions, using the Long Arm Hex Key and a single 10/32” x 3/8” Flat Head Cap Screw and 10/32” Backing Plate and tools supplied with each WEAPON CONTROL MOUNT-N-SLOT™.
•NO GUNSMITHING - Mounting does not require alteration of firearm hand guard heat shields.
•Directly Attaches to: Magpul Industries Corp. M.O.E.™ Carbine or Mid-length or A2 Round Hand Guards or TROY™ TRX / VTAC EXTREME, JPI, Inc. / VIKING TACTICS Fore Ends, PRI, Inc. GEN III Fore Ends, MIDWEST INDUSTRIES SS SERIES Hand Guards, YHM, Inc. Smooth & Customizable and ANY Round Tubular Hand Guard / Fore End with Slots or Holes.
•!00% LIFETIME WARRANTY. PERIOD. Return for full refund including your shipping charges.
•MADE IN USA; Including Materials, Tool and Packaging.
•IWC’s MOUNT-N-SLOT products are MADE BY AMERICANS in COLORADO.
Thanks,
MOUNT-N-SLOT
Impact Weapons Components, LLC is proud to announce our new WEAPON CONTROL (hand stop) MOUNT-N-SLOT brand Direct Attach Mounts
APPLICATION:
Magpul Industries Corp M.O.E. CARBINE-Length Hand Guards and ANY A2/M4 Style ROUND Hand Guards and Troy, Ind. TRX/VTAC Extreme Battlerails, JPI,Inc/Viking Tactics, Inc. VTAC Fore Ends, Midwest Industries, Inc SS Series, PRI, Inc GEN III, YHM, Inc Smooth & Convertible and ANY ROUND Hand Guard / Fore End with a HOLE or SLOT
READ THE WEAPON CONTROL MOUNT-N-SLOT REVIEWS!!!
Review: YELLOWV
Review: NickDrak
Review: "Jerking the Trigger" by Matthew Danger
ELIMINATE RAILS: IWC's Direct Attach MOUNT-N-SLOT design eliminates the need for bolt-on rail sections, saving weight, bulk, space while reducing part count and improving function and reliability.
BUY NOW
PRICE: $39.95 EACH + $3.95 S+H
PATENT PENDING
WEAPON CONTROL MOUNT-N-SLOT - Made by Impact Weapons Components in Colorado:
•WEAPON CONTROL MOUNT-N-SLOT™ is designed to provide a low profile, ergonomic and highly functional device for enhancing weapon control.
•IWC designed the WEAPON CONTROL MOUNT-N-SLOT™ to attach directly anywhere on the surface of the hand guard / fore end through any hole / slot, eliminating the need for a 1913 MIL-SPEC Rail Sections.
•Direct Attach Design saves weight, reduces part count, increases weapon reliability and increases the function of the WEAPON CONTROL MOUNT-N-SLOT™ by placing it directly against the surface of the hand guard / fore end.
•The operator can place them in the desired location, usually along the bottom of the hand guard, allowing the weapon to be pulled into the shoulder pocket, or directly attached to the side of the hand guard, allowing the WEAPON CONTROL MOUNT-N-SLOT™ to index perfectly in the web of your hand, like a GLOCK™ or 1911 would, for proper alignment behind a weapon mounted flashlight.
•SPEND LESS MONEY: Compare to $60.00 or more for a Hand Stop Mount + a Rail Section + Shipping Charges.
•DIRECT attach design eliminates the need for 2 separate mounts; 1- A Hand Stop Mount and 2 - A Picatinny MIL-Spec 1913 Bolt-on Rail Section.
•Ergonomic, DIRECT attach design eliminates all sharp edges which can ensnarl the operator’s gear.
•55% increase in usable hand guard grip area by eliminating the Picatinny MIL-Spec 1913 Bolt-on Rail Section.
•35% lower profile than a separate Mount and Picatinny MIL-Spec 1913 Bolt-on Rail Section.
•Ultra-lightweight MOUNT-N-SLOT™ design weighs only .79 ounces. Over 65% less than a separate Hand Stop Mount and Picatinny MIL-Spec 1913 Bolt-on Rail Section.
•3 parts are eliminated from your firearm.
•Micro-Adjustable mounting allows the operator to mount anywhere through any SLOT or HOLE on the firearm hand guard.
•CNC Machined from 6061-T6 aluminum; Hard anodized Type III matte finish per MIL-A-8625F.
•Easily installation and simple to follow instructions, using the Long Arm Hex Key and a single 10/32” x 3/8” Flat Head Cap Screw and 10/32” Backing Plate and tools supplied with each WEAPON CONTROL MOUNT-N-SLOT™.
•NO GUNSMITHING - Mounting does not require alteration of firearm hand guard heat shields.
•Directly Attaches to: Magpul Industries Corp. M.O.E.™ Carbine or Mid-length or A2 Round Hand Guards or TROY™ TRX / VTAC EXTREME, JPI, Inc. / VIKING TACTICS Fore Ends, PRI, Inc. GEN III Fore Ends, MIDWEST INDUSTRIES SS SERIES Hand Guards, YHM, Inc. Smooth & Customizable and ANY Round Tubular Hand Guard / Fore End with Slots or Holes.
•!00% LIFETIME WARRANTY. PERIOD. Return for full refund including your shipping charges.
•MADE IN USA; Including Materials, Tool and Packaging.
•IWC’s MOUNT-N-SLOT products are MADE BY AMERICANS in COLORADO.
Thanks,
MOUNT-N-SLOT
11/29/2010 1:23:57 PM
On the TRX Extreme what keeps this from rotating? I see no grooves in the bottom, to interface with the exterior grooves in the rail.
I like this comcept. I REALLY, REALLY LIKE THIS CONCEPT!
Thanks Bob W
I like this comcept. I REALLY, REALLY LIKE THIS CONCEPT!
Thanks Bob W
11/29/2010 1:25:27 PM
Originally Posted By kabob:
On the TRX Extreme what keeps this from rotating? I see no grooves in the bottom, to interface with the exterior grooves in the rail.
I like this comcept. I REALLY, REALLY LIKE THIS CONCEPT!
Thanks Bob W
On the TRX Extreme what keeps this from rotating? I see no grooves in the bottom, to interface with the exterior grooves in the rail.
I like this comcept. I REALLY, REALLY LIKE THIS CONCEPT!
Thanks Bob W
well if you look at the third pic you can see that it is rounded to the handguard which that alone should keep it from rotating
11/29/2010 1:37:45 PM
I like it, but how does this improve reliability?
11/29/2010 1:43:49 PM
Originally Posted By sinlessorrow:
well if you look at the third pic you can see that it is rounded to the handguard which that alone should keep it from rotating
Originally Posted By kabob:
On the TRX Extreme what keeps this from rotating? I see no grooves in the bottom, to interface with the exterior grooves in the rail.
I like this comcept. I REALLY, REALLY LIKE THIS CONCEPT!
Thanks Bob W
On the TRX Extreme what keeps this from rotating? I see no grooves in the bottom, to interface with the exterior grooves in the rail.
I like this comcept. I REALLY, REALLY LIKE THIS CONCEPT!
Thanks Bob W
well if you look at the third pic you can see that it is rounded to the handguard which that alone should keep it from rotating
OK I just facepalmed my self (DOOOH)
11/29/2010 4:21:57 PM
Originally Posted By kabob:
On the TRX Extreme what keeps this from rotating? I see no grooves in the bottom, to interface with the exterior grooves in the rail.
I like this comcept. I REALLY, REALLY LIKE THIS CONCEPT!
Thanks Bob W
On the TRX Extreme what keeps this from rotating? I see no grooves in the bottom, to interface with the exterior grooves in the rail.
I like this comcept. I REALLY, REALLY LIKE THIS CONCEPT!
Thanks Bob W
There are two tabs that slip into the slot that make it impossible for this to rotate.
