WAAAAy to much fun!!!

OK i think i jsut got lucky on my build but it worked flawlessly right off the bat (shooting Wolf MC no doubt) through about 160 or so rounds. I will have to post pics later once i get my handgaurd back from machine shop, Had to have them cut a slot so it will slip down over the gas tube since it was made to be installed first then have tube passed through it (kinda hard to do when hand gaurd is as long as the barrel hehe.

Safe to say this thing will be an ammo eater.

Stag arms lower
DPMS LPK
Delton flat top upper
ASA 7.5" barrel
LMT BCG
Pistol buffer tube from Palmetto state armory, looks to be an RRA but had no packaging
DPMS pistol gas tube
Olympic Carbine buffer
Advanced Tech buffer spring
YHM low pro gas block
UTG carbine handgaurd (required some machining)

Getting custom sights machined

Same thing here with the UTG hand guard. I had the pistol one first but like the complete shrouded look better so I found a carbine version cheap in the EE. Luckily I'm my own shop and can do the mod for the gas block myself. Glad to see I'm not the only one going cheap and using the UTG HG! Curious to see your sights when done.

My upper is one of the JSE uppers and I'm having problems with short stroking and FTE completely. I only tried it with Wolf ammo (not MC) so I'm hoping the switch to 5.56 nato stuff will fix it. I might have to open the gas port a tad.

My brother works in a machine shop, he already manufactures custom clamp on brakes and if the sights work i will probably start marketing those.

Copyright © 1996 - 2013 :: AR15.Com LLC :: All Rights Reserved.
Any use of this content without express written consent is prohibited.