So is a p415 a4 or m4 cut? I read in another thread somewhere that the A4 or M4 (whichever im not sure what the name is) feed ramps need to be cut into the receiver itself... is that right? Min has feed ramps... well actually one large feed ramp, not two small seperated ones and it's not cut in the receiver... works fine though. Any ideas?
Originally Posted By prionic1:
Min has feed ramps... well actually one large feed ramp, not two small seperated ones and it's not cut in the receiver... works fine though. Any ideas?
This is how they are all being produced. we have been real happy with this design and it has been working great. If the deeper M4 ramps was truely needed, we would be putting it on everything. The feedramp discussion can sometimes get heated. some people have really strong views and opinions on it, so I am not wanting to get into it, I hope you can understand. but out ramp does work, we did a lot of design work on it.
my 2008 P415 11.5 inch SBR has major feed problems, the round slams into the feed ramp and gets stuck between the chamber and magazine. I changed ammo, magazines, and lowers and still had problems. It seem as if an extended ramp might help but Im still waiting to get it back from the factory to see what they do.
