if i get the 3h model and put the magpul front and rear flip buis on it, will the sight align? do i need to add any kind of riser under the front sight?
stag say they zero all the upper and rifle before they ship, how they do it on 3h????
I have the same set up just look at 1 post up about the sighting problem.. the MBUS will not need a riser.. as for zeroing it that was my problem. called stag and tryied to trouble shoot the problem. finally they decided to sent it back ,they thingk is canted. im happy with there customer service people very helpfull. hope fully they fixed it i sent it with the MBUS on it.
You can not use the Magpul sight on the front of the model 3H as the gas block rail will get to hot and melt the sight. You can use any steel front folding sight that is designed to be mounted on a RAILED GAS Block.
The model 3H gas block rail is set up so that a proper front sight will work with any flip rear sight.
You can use the Magpul rear flip sight
Not trying to hijack this thread but since not getting any answers in my topic for a gas block front sight what would people recommend? I will post a link to the topic below not to hijack this thread......
The Magpul front flip up sight will not work with the Model 3H. the front sight is designed to work on the same plane as the rear sight(rail height). Our gas block sits .250" below the rail on the receiver and the proper height front sight needs to be used(gas block height). Also, as someone mentioned before the Magpul front flip up sight can not be used on gas blocks due to the potential for them to melt.
We recommend utilizing the Samson front flip up sight which has been tested to work with our gas block and will flip down without touching the hand guard cap.